Well gentleman....I dont want to get rid of her. But if the price is right, i would. Here is the breakdown. Check out the setup.

Block
ERL Pro Sleeved 84mm B16. (1715cc) sleeves are the same sleeves Joe Demaree runs in his full drag car. Not their normal street sleeves. Capable of 40+psi and 700+hp.
Crower B16 Rods w/ ARP rod Bolts
JE 9.0:1 Pistons
ERL 5 Main Girdle w/ ARP Mains
ITR Oil Pump
GSR Water Pump
ACL Bearings
Brand new P72 GSR oil pan to clear the girdle (from honda)

Head
B17 Head
Hondata Intake Manifold Gasket (This thing works...Look at my datalog!)
Skunk2 Titanium Valvesprings and Retainers
Ferrea SS Valves
Mild P&P
GSR Cams
Skunk2 IM
Stock TB
Cometic Head Gasket
Fresh Valve job and valve seals (6kmiles)

Drivetrain
GSR YS1 Transmission (currently about to rebuild)
ACT Maxx Xtreme Pressure Plate
ACT 6 Puck Unsprung Disc
10.5 Lb Lightened Stock Flywheel
Stock Axles

Engine Management & Electronics
Stewart Warner 40psi vac/boost gauge, Oil Psi gauge, and water temp gauge.
JDM GSR 9500rpm tach

Fuel System
Walbro 255lph High Pressure Fuel Pump
Stock Fuel Lines and rail
RC 1000cc High Impedance Injectors


Now the good ****....

Turbo kit
Autolab Custom Made B-Series Topmount Turbo Kit
Autolab Custom Made Topmount Manifold, Jet-Hot Coated (black)
Autolab Custom Made 3" Downpipe w/ flex section
Autolab Custom Made Aluminum Charge Piping (only about 4 feet total of piping for the entire kit, and its only on the cold side.)Polished!
Autolab Custom Made Turndown Dump Exhaust (dumps right under backseats)
Autola Custom Made Backdoor Intercooler (handformed endtanks and Garrett Core)(bar and plate...almost forgot that)
Silicone Couplers and humphose coupler(total of 3 couplers and 6 t-bolts)
All T-bolts
Tial 50mm BOV
Tial 44mm Wastegate with 1bar spring
Autolab Custom Made Dumptube w/ v-band
Vacuum Distribution Block (cleanliness)

Cooling System
Dual Core Del Sol Radiator (new)
1400cfm 12" Electric Fan
Water+Water Wetter (no antifreeze)

The car
1993 Frost White GS-R
Front Bumper Needs Paint
Few small dings on the car. nothing too serious
Mint interior besides a burn hole on the passenger seat bolster. (not from me)
Skunk2 Coilovers on stock struts....Not blown
14" gsr wheels with yokohama AVS ES 100's
New brake pads
Tinted 92-93 Taillights
No A/C...No P/S
Sunroof, no leaks!
Power everything
No Cruise Control

Details
Serious offers only. No lowballing, this isnt your everyday home built turbo car. This is all done professionally and right
Work was done by Autolabonline.com

* ASKING $7500 OBO *
NEEDS TURBO AND MANAGEMENT TO RUN!!!
I HAVE AN AUTRONIC P&P I CAN INCLUDE FOR THE RIGHT PRICE. USED TO BE A T67 CAR. DONT HAVE TIME OR MONEY FOR IT ANYMORE!!!

For pics email me
Any questions contact me @ VTAKT67@INSIGHTBB.COM or AIM @ VtakT67



Modified by Vtak at 11:46 PM 12/21/2005

 

Bump it up!

 

Bump it up for a Ballin *** setup at a broke *** price

 

Bump

 

pics including interior please
dcmiles@gmail.com
thnks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smutmonger &raquo;</TD></TR><TR><TD CLASS="quote">pics including interior please
dcmiles@gmail.com
thnks</TD></TR></TABLE>
Fo Sho ...... Pics of the Beast
Peace Chris A Town

 

I'll just post them here to make it easier for everyone.

http://vtak.geektuned.com/Engine%20Bay.jpg
http://vtak.geektuned.com/Engine%20Bay2.JPG
http://vtak.geektuned.com/Front%20End.jpg
http://vtak.geektuned.com/Front%20Mount%202.JPG
http://vtak.geektuned.com/Front%20Mount.JPG
http://vtak.geektuned.com/Intercooler3.JPG
http://vtak.geektuned.com/Topmount.JPG
http://vtak.geektuned.com/Wastegate.JPG

And for the right price:

http://vtak.geektuned.com/Autronic.JPG

I'll get some interior pics soon.