Ignition Switch Replacement
Thread Starter
New User
Joined: Apr 2001
Posts: 4,569
Likes: 0
Ignition Switch Replacement
My ignition switch has gone bad. Or atleast I am diagnosing it as that.
Has anyone ever done a replacement of the switch? I know it involves drilling out the old bolts because they are break off head type.
If that is the most difficult part then I am in the clear.
Has anyone ever done a replacement of the switch? I know it involves drilling out the old bolts because they are break off head type.
If that is the most difficult part then I am in the clear.
Honda-Tech Member
Joined: Sep 2005
Posts: 209
Likes: 0
From: Los Angeles, CA, USA
Re: Ignition Switch Replacement (urbanlegend21)
before you start, what is wrong with the ignition switch?
you dont have to drill it out. carefully use a hammer and a flathead. put the flathead in an angle and hit it counter clockwise to loosen the screw. if you want to replace it with a 10mm or 12mm if you like.
you dont have to drill it out. carefully use a hammer and a flathead. put the flathead in an angle and hit it counter clockwise to loosen the screw. if you want to replace it with a 10mm or 12mm if you like.
Thread
Thread Starter
Forum
Replies
Last Post
