help, T Bone, DonF and any other who ever try this cam. in this week im going to installed my skunk2 pro stg 2 cam, the cam didnt came with the spec sheet, i only know that the centerline was 98in, 104ex..

 

7 and 9 is good. i believe the spec says 6 and 8. i will look at my sheets in a few

 

thanks RPRacing, btw did you also installed those cam centerline at 98.in / 104.ex ??

 

Double check the centerline on the intake cam.

I will look it up and post back later.

 

.007 In .009 ex. 100 in ctr. 104 Ex. ctr. Start there. Remove fuel, add timing at idle, tune the rest as normal.

 

thanks guys, btw im running it on ITR motor with twin weber 50mm. i know it maybe too big for stock displacement 1.8L. but this cam is for the next 2020cc progress for next years

 

rpr racing, are you the guy which ever tried skunk2 pro stg 2 vs stg 3??

 

not the 2s vs 3 yet, but we might do them soon if the new motor get done in the next month or 2

we did do the Stage 2, Pro 1, and Pro 2 though, check out my Sig

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jt-sport &raquo;</TD></TR><TR><TD CLASS="quote">rpr racing, are you the guy which ever tried skunk2 pro stg 2 vs stg 3??</TD></TR></TABLE>

Check Vteckidds thread, he and DonF did a test of Pro2s vs Pr03s.

Pro3s made 10hp first pull i believe according to his thread

 

DonF what kinda timing are you running on these newer cams to keep them from being lumpy at idle?