My gm boost solenoid stopped clicking when i turn on my car. Normally i would hear a loud clicking but recently it hasn't been doing so. Anyone know if these things die frequently? Is my gm boost solenoid died since i dont hear it clicking anymore?

Oh ya, and i was boosting around 1 bar on the street , but now i get half that which is around 0.5bar.

Thanks in advance..

 

it most likely died from being on all the time,i run mine on aem so it turns on at 2000 rpm,so it doesn't tick all the time...just my 2 cent.

 

The preset AEM settings are a min duty cycle of 10% and max of 85%, change those and configure your boost/duty map and/or your VSS map to keep the solenoid off at idle, etc...

 

You can also configure the output to be off below say 10mph. When your moving you wont hear it.

 

yes it died go buy a new one they are pretty cheap

 

if i post up my map from my aem, can someone tweak that for me?

and only reliable people will be editing it for me just in case someone thinks its funny lean out my entire fuel map and want to blow up my car.

Thanks....