Alright, I've searched this site through and through and have found what I thought to be answers to the ensuing questions I have. But I realized that my application is a little different than most of the ones people were talking about so I finally decided to just ask...

I have a 91 civic hatchback DX. I have a b18 swap on the very brink of success, just have a few things to take care of. I'm using a rare b16 cable tranny.

Now, the question...What axles????? I keep reading 90-93 teg axles and intermediate shaft, but like i said, my application is a little different. I could just bite the bullet and spend a sh** load of money on hasport axles or raxle axles. But I'd rather make it so I can just go to a local parts store and get them, ofcourse. This is like the last entity of my swap that I need, and if ya'll could help me I would be very very appreciative. Thanks!

 

Come on I know there's tons of people out there that have answers for me.

 

I guess this site isn't all its cracked up to be if no one is going to take the time to help a fellow Honda Enthusiast out. COME ON!!!!!!!!!!

 

The seach button is your friend. This has been coverd a million times over. Remove the dust rings on the hub and rubber gromets on the axles and put em in already. You need to run 90-93 axles from a teg with a 90-93 teg intermeadiate shaft. It MUST BE a 5spd one, cause the auto one will NOT bolt up.

Good Luck,

Blaze