Anyone ever try this? I only ask because with 15" slips; there was maybe a mm or two for clearence between the caliper and wheel. Thanks All.

 

I don't think they will fit any 15in stock wheels. I thought I read that on the fastbrakes page somewhere. Slips have lots of extra room under them and if you are that close with the slips I doubt you would be able to make'em fit. Unless you find some spacers

Which calipers are you getting, wilwood or teggy?

 

Ash, when did you get an ED and a fastbrakes kit?

 

i have the kit with 15" steel wheels and they fit fine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88 rex &raquo;</TD></TR><TR><TD CLASS="quote">I don't think they will fit any 15in stock wheels. I thought I read that on the fastbrakes page somewhere. Slips have lots of extra room under them and if you are that close with the slips I doubt you would be able to make'em fit. Unless you find some spacers

Which calipers are you getting, wilwood or teggy?</TD></TR></TABLE>

itr calipers with corrado rotors.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX &raquo;</TD></TR><TR><TD CLASS="quote">Ash, when did you get an ED and a fastbrakes kit?</TD></TR></TABLE>

its that silver ef you've seen pictures of. maybe i'll jam my gsr motor in it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordlove &raquo;</TD></TR><TR><TD CLASS="quote">i have the kit with 15" steel wheels and they fit fine.</TD></TR></TABLE>


Yea, I went back and read the fastbrakes page:

This is the complete front upgrade for the 1988 to 1991 Civic or CRX. 11 inch slotted & drilled rotors with remanufactured Integra calipers, Axxis Ultimate pads, front braided steel lines. REQUIRES 15 inch wheels. Factory wheel will fit. Applications 1988-1991 CRX all 1988-1991 Civic DX, Si



I guess they do fit. I've been reading up on too many brake set ups and what fits lately that everything gets jumbled in my head.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88 rex &raquo;</TD></TR><TR><TD CLASS="quote">


Yea, I went back and read the fastbrakes page:

This is the complete front upgrade for the 1988 to 1991 Civic or CRX. 11 inch slotted & drilled rotors with remanufactured Integra calipers, Axxis Ultimate pads, front braided steel lines. REQUIRES 15 inch wheels. Factory wheel will fit. Applications 1988-1991 CRX all 1988-1991 Civic DX, Si



I guess they do fit. I've been reading up on too many brake set ups and what fits lately that everything gets jumbled in my head.</TD></TR></TABLE>

Awsome. Thanks for doing the obvious I was too lazy to do.