Man if its not one thing its another I just cant seem to get it right. well i finally did get the car running the way that i wanted but its wasn't that great so i decided to get the ecu chipped with BRE well i got the ecu back and its throwing a solid cel witch isn't good. So if any one is familiar with bre please give me some pointers.

 

is the check engine light solid or the light on the ecu

 

both

 

ecu is toast

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88cerx &raquo;</TD></TR><TR><TD CLASS="quote">ecu is toast </TD></TR></TABLE>

wtf no. Stop spreading crap.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tallguy &raquo;</TD></TR><TR><TD CLASS="quote">i decided to get the ecu chipped with BRE well i got the ecu back </TD></TR></TABLE>

First, I would talk to who did the chipping, and see what they have to say. Check simple stuff like is there a chip installed, is it installed backwards, are all the pins in all the holes, etc. Does it look like a hack job, or is it somewhat neat. Then there is the possiblity that the chip wasn't burnt correctly, and a new one just needs to be burnt.

 

i agree with him!^^^^^^^^^^
i think if it was fried the light would blink at all or would it.

 

Solid light is CEL 0, which is bad ecu. That has happened to me a few times when we burned bad chips and stuff. Just ask whoever burned it to do it again .