Mint B16a EG Hatch NJ, PA, DE Cage, Apexi, Momo etc
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 2,946
Likes: 0
Mint B16a EG Hatch NJ, PA, DE Cage, Apexi, Momo etc
Want to Trade
240sx
Subaru Legacy 00 and above (must be manual)
2.5RS
Must be awd/rwd
This White EG hatch was picked up one year ago from the grandmother of a high school friend. It was completly bone stock for the first 135000 miles that she owned it, and has now fallen into my possesion. An accident free, non rusted perfectly aligned body was acquired as if it were fate.... however, as a Senior in college, and having spent pretty much most of my time and money on it it is time to let it go. There are absolutly no problems with it I am just getting a head start on life to come...
Has a Jersey inspection sticker for 2 years this month... does not need to be inspected until august 07
AIM-Stirtch
Phone 609-802-8884
Email eguidice@hotmail.com
Engine
JDM B16a
SCO motorsports J's Replica Intake
Spoon Header
Test Pipe
Worldsport Exhaust
AEBS cam seal
Uberdata Tuned p28 also included is a skunk 2 chip
Tranny
B16a nonLSD tranny
exedy stage 1 clutch
Napa unbreakable axles
Synchromesh Friction Modified Transmission Fluid
Suspension
SRR tie Bar
Omni LCAs
Omni Street Coilovers 10k front 8k rear
Wheels
15x7 +38 Silver Kosei K1s
Kuhmo 712s
Tire Rack extended Lug nuts
Interior
Fully Stripped Gutted and painted to match exterior
Black EG Dash
AutoGuage Carbon Fiber Tachometer with built in shift light
Floor mats optional with custom mount or without
Momo rookie Drivers Seat
EK Passenger Seat
Corbeau harnesses Both included
Voodoo Shift ****
Broadway Mirror
Kirk Racing Roll Bar with crossbrace and harness bar
STILL HAS HEAT No A/C though
Pioneer Head Unit
Infinity Kappa 6.5 front speakers
Infinity Kappa 6x9 Custom Mounted rear speakers
Exterior
OEM Passenger side view mirror
Spoon Style ABS front lip
Ricks S badge on the hood
amber corners
Rolled fenders
Weightstripping
All Sounddeadener removed
Sanded, primed and painted interior.
Bumper supports were removed, but put back in for next owners safety.
antenna removed
Extra wiring removed i.e. interior light, door open/closed sensors etc
Weight with one seat, 1/4 tank of gas no bumper supports as it sits with me in it 2098
No power steering No A/C, all new wheel bearings, new stock pads 2 months ago...oil changed with mobil 1 every 2000, paperwork for the motor.
<U>PARTS PENDING</U>
Bride steering wheel 320mm *purchased
Quick disconnect Hub *purchased
GSR Front brake upgrade *pending
GSR master Cylinder *pending
GSR Porp *pending
GSR rear disc conversion *pending
Carbotech panther plus pads *pending
brembo blanks *pending
Problems:
Chips in the paint where the wheel rubbed....pictures are not edited one bit so you can see its not that big
No stock seatbelts
Modified by StreetEG at 6:12 AM 12/19/2005
240sx
Subaru Legacy 00 and above (must be manual)
2.5RS
Must be awd/rwd
This White EG hatch was picked up one year ago from the grandmother of a high school friend. It was completly bone stock for the first 135000 miles that she owned it, and has now fallen into my possesion. An accident free, non rusted perfectly aligned body was acquired as if it were fate.... however, as a Senior in college, and having spent pretty much most of my time and money on it it is time to let it go. There are absolutly no problems with it I am just getting a head start on life to come...
Has a Jersey inspection sticker for 2 years this month... does not need to be inspected until august 07
AIM-Stirtch
Phone 609-802-8884
Email eguidice@hotmail.com
Engine
JDM B16a
SCO motorsports J's Replica Intake
Spoon Header
Test Pipe
Worldsport Exhaust
AEBS cam seal
Uberdata Tuned p28 also included is a skunk 2 chip
Tranny
B16a nonLSD tranny
exedy stage 1 clutch
Napa unbreakable axles
Synchromesh Friction Modified Transmission Fluid
Suspension
SRR tie Bar
Omni LCAs
Omni Street Coilovers 10k front 8k rear
Wheels
15x7 +38 Silver Kosei K1s
Kuhmo 712s
Tire Rack extended Lug nuts
Interior
Fully Stripped Gutted and painted to match exterior
Black EG Dash
AutoGuage Carbon Fiber Tachometer with built in shift light
Floor mats optional with custom mount or without
Momo rookie Drivers Seat
EK Passenger Seat
Corbeau harnesses Both included
Voodoo Shift ****
Broadway Mirror
Kirk Racing Roll Bar with crossbrace and harness bar
STILL HAS HEAT No A/C though
Pioneer Head Unit
Infinity Kappa 6.5 front speakers
Infinity Kappa 6x9 Custom Mounted rear speakers
Exterior
OEM Passenger side view mirror
Spoon Style ABS front lip
Ricks S badge on the hood
amber corners
Rolled fenders
Weightstripping
All Sounddeadener removed
Sanded, primed and painted interior.
Bumper supports were removed, but put back in for next owners safety.
antenna removed
Extra wiring removed i.e. interior light, door open/closed sensors etc
Weight with one seat, 1/4 tank of gas no bumper supports as it sits with me in it 2098
No power steering No A/C, all new wheel bearings, new stock pads 2 months ago...oil changed with mobil 1 every 2000, paperwork for the motor.
<U>PARTS PENDING</U>
Bride steering wheel 320mm *purchased
Quick disconnect Hub *purchased
GSR Front brake upgrade *pending
GSR master Cylinder *pending
GSR Porp *pending
GSR rear disc conversion *pending
Carbotech panther plus pads *pending
brembo blanks *pending
Problems:
Chips in the paint where the wheel rubbed....pictures are not edited one bit so you can see its not that big
No stock seatbelts
Modified by StreetEG at 6:12 AM 12/19/2005
Honda-Tech Member
Joined: Feb 2005
Posts: 239
Likes: 0
From: you ess of A
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 2,946
Likes: 0
Re: Mint B16a EG Hatch NJ, PA, DE Cage, Apexi, Momo etc (ICeDoUt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ICeDoUt »</TD></TR><TR><TD CLASS="quote">nice shots, bump for you, where are those roads at PA?</TD></TR></TABLE>
Right by my house in jersey... farm towns are great.
Right by my house in jersey... farm towns are great.
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 2,946
Likes: 0
Re: Mint B16a EG Hatch NJ, PA, DE Cage, Apexi, Momo etc (sean)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sean »</TD></TR><TR><TD CLASS="quote">argh, must you tempt me?</TD></TR></TABLE>
Pm'd....
Pm'd....
