Wantboost's garage sale... power steering, air conditioning, oem, b16 differential, autometer, cat,
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
I accept paypal, my address is wantboost@hotmail.com please add the 4%
prices do not include shipping unless other wise noted
i have numerous vouches on ht
All parts are off of my em1 and have 50k miles on them unless otherwise stated
first up is a compete ac system of out my 99 si (em1) it comes with everything, all of the lines, condensor, pump, dryer, and the mounting bracket... i dont think i have the bolt for the pulley to bolt to the bracket nor the bolts from bracket to block








100
next is the oem half core rad out of my em1... has the usual bent fins... in very good shape, comes with rad cap

50
next is the stock radiator fan... operates perfectly, no chipped blades or cracked housings

25
(buy both the rad and fan and pay 65)
Oem cat off of my si

MAKE OFFER
Powersteering pump, mounting bracket and reservior, in perfect working condition. i also have the lines to and from the steering rack but they are still attached (removing them this weekend)


40 (50 with lines)
Cruise control unit

30
Clutch master cylinder, made my nissin... 5/8ths diameter piston

40
Brake master cylinder. 7/8ths diameter piston. oem off of car made by Findlex



Autometer Ultralite A/F gauge. 2 1/16th in perfect condition, comes with 4ft of wire


35
40/40 brake proportioning valve. comes with bolts
SOLD
Garrett T3 turbo center section. needs new bearings, other than that its mint... oil and water cooled




50
B16a2 axles.. passenger and drivers side... perfect shape, turn freely, no binding.. no tears/snags in boots

120
OEM Differential out of my si. WILL NOT COME WITH VSS GEAR OR RING GEAR

75obo
Polished 60 trim T3 compressor housing.. made by garrett... uses the bolt on flanges

50obo
Nissan 60 trim t3 compressor housing... uses hose clamps unlike the garrett style. perfect shape.
(PICS LATER)
40
Garrett t3 exhaust housing... .48ar, ford 5-bolt pattern designed for a stage 1 wheel... no cracks or anything but a stud did break off in the housing
(PICS LATER)
40
Internal wastegate assembly, comes with actuator, everything.. not sure what psi the actuator is but will find out

35
im pretty sure i can think of more later... feel free to make offers on stuff
Modified by wantboost at 2:02 AM 11/12/2005
prices do not include shipping unless other wise noted
i have numerous vouches on ht
All parts are off of my em1 and have 50k miles on them unless otherwise stated
first up is a compete ac system of out my 99 si (em1) it comes with everything, all of the lines, condensor, pump, dryer, and the mounting bracket... i dont think i have the bolt for the pulley to bolt to the bracket nor the bolts from bracket to block








100
next is the oem half core rad out of my em1... has the usual bent fins... in very good shape, comes with rad cap

50
next is the stock radiator fan... operates perfectly, no chipped blades or cracked housings

25
(buy both the rad and fan and pay 65)
Oem cat off of my si

MAKE OFFER
Powersteering pump, mounting bracket and reservior, in perfect working condition. i also have the lines to and from the steering rack but they are still attached (removing them this weekend)


40 (50 with lines)
Cruise control unit

30
Clutch master cylinder, made my nissin... 5/8ths diameter piston

40
Brake master cylinder. 7/8ths diameter piston. oem off of car made by Findlex



Autometer Ultralite A/F gauge. 2 1/16th in perfect condition, comes with 4ft of wire


35
40/40 brake proportioning valve. comes with bolts
SOLD
Garrett T3 turbo center section. needs new bearings, other than that its mint... oil and water cooled




50
B16a2 axles.. passenger and drivers side... perfect shape, turn freely, no binding.. no tears/snags in boots

120
OEM Differential out of my si. WILL NOT COME WITH VSS GEAR OR RING GEAR

75obo
Polished 60 trim T3 compressor housing.. made by garrett... uses the bolt on flanges

50obo
Nissan 60 trim t3 compressor housing... uses hose clamps unlike the garrett style. perfect shape.
(PICS LATER)
40
Garrett t3 exhaust housing... .48ar, ford 5-bolt pattern designed for a stage 1 wheel... no cracks or anything but a stud did break off in the housing
(PICS LATER)
40
Internal wastegate assembly, comes with actuator, everything.. not sure what psi the actuator is but will find out

35
im pretty sure i can think of more later... feel free to make offers on stuff
Modified by wantboost at 2:02 AM 11/12/2005
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
thanks, just let me know.
btw, all items will be cleaned before they are shipped. i realize some items arent as clean as they should be, but i sort of took the pics in a hurry since i had to head back to school
btw, all items will be cleaned before they are shipped. i realize some items arent as clean as they should be, but i sort of took the pics in a hurry since i had to head back to school
Trending Topics
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
bump.... you choose super milage over formula sae... traitor
bump...no i didn't. if you noticed, we have no real mileage team. were not going this year.
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
yea, smv is stupid anyways... bump
proportioning valve sold to redline96lx
proportioning valve sold to redline96lx
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
thanks.
bump for just getting up.... seriously
bump for just getting up.... seriously
bump. buy his stuff, he needs the money for an operation for his pet little brother.



Good seller.
