YEAH I WAS WONDERING WHAT ARE THE SPECS ON SOME M7'S 15" INCH RIMS AND 5X114. LUG PATTERN???

 

PLEASE ANY BODY

 

specs, as in offset?

 

http://www.wheelspecs.com/specs/wheelmodels/262

 

AS IN EVERYTHING THERE IS TO KNOW ABOUT THESE RIMS

 

WHEELSPECS.COM DIDNT HELP MUCH BUT THANKS THOUGH

 

freakin hell turn of your caps.

edit from my puny brain i think that they come in what? 4x114 and 5xwhatever it is. think its 15 only or i could be wrong. and offsets are prolly typical honda offsets.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lazybrown187 &raquo;</TD></TR><TR><TD CLASS="quote">AS IN EVERYTHING THERE IS TO KNOW ABOUT THESE RIMS</TD></TR></TABLE>

They're made by Mugen, a company in Japan. They have 7 spokes. They're shiny. They're expensive. Find some and buy them, and your nuts will sag to the ground from the weight of H-T'ers swinging by them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowata &raquo;</TD></TR><TR><TD CLASS="quote">

They're made by Mugen, a company in Japan. They have 7 spokes. They're shiny. They're expensive. Find some and buy them, and your nuts will sag to the ground from the weight of H-T'ers swinging by them.</TD></TR></TABLE>

lol its so true to. mugen gets you laid by ht leg humpers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by johnxboi &raquo;</TD></TR><TR><TD CLASS="quote">freakin hell turn of your caps.

edit from my puny brain i think that they come in what? 4x114 and 5xwhatever it is. think its 15 only or i could be wrong. and offsets are prolly typical honda offsets. </TD></TR></TABLE>
REALLY WOW! READ MY SIGNATURE;I HAVE ALREADY ORDERED A SET FROM http://WWW.ICBMOTORSPORTS.COM[PLUG] {ECAHATCH I DID'NT MEAN TO SAY THAT WHAT ARE YOU TALKING ABOUT.

 

i dont know man. mine are 15x6.5 and are 4x100 in a +45 offset.

from what i have seen, they come in 15x6.5, 15x7, 16x7, and staggered 17x7.5 for NSX's or S2000s.

anything else you need to know?

 

16" m7's are a +60 offset, you need to run a spacer, 10mm as I remember I had. I HAD a set, im retarded, my new volks are makin up for it though

 

Isnt rota in the process of making knockoffs? Wait till those come out, there going to be extremly way cheaper

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nexus131 &raquo;</TD></TR><TR><TD CLASS="quote">Isnt rota in the process of making knockoffs? Wait till those come out, there going to be extremly way cheaper</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nexus131 &raquo;</TD></TR><TR><TD CLASS="quote">Isnt rota in the process of making knockoffs? Wait till those come out, there going to be extremly way cheaper</TD></TR></TABLE>

Yea they are, thats one thing keeping me happy I sold them. The only real difference is lack of a mugen emblem, the center cap, and theres 30 rivets on the rota and 40 on the mugen, I believe, Im regurgitating what I have read on here before

 

they are to be on the top of the Baller Food Chain as far as USED wheel owners.

 

Mugen M7's are a multi-piece forged/spun wheel. They use an assembly process called SAS or Super Assembly System, hence the rivets on the wheels. All Mugen wheels are manufactured by RAYS ENGINEERING so we know the wheel is a quality piece. They are most commonly found in 4X114.3 and 5X114.3 bolt pattern, but there are rare sets of 4X100 M7's.


Modified by kNOwLedGeDA9 at 6:48 PM 11/10/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGeDA9 &raquo;</TD></TR><TR><TD CLASS="quote"> All Mugen wheels are manufactured by RAYS ENGINEERING Modified by kNOwLedGeDA9 at 6:48 PM 11/10/2005</TD></TR></TABLE>

sorry man but that info is inaccurate....not all mugen wheels are made by rays. oz made some of the race wheels and the M12 http://www.wheelspecs.com/specs/wheelmodels/261. also, some of the older wheels where manufactuered by some independent wheel makers.

here's what i know from experience:

15x6.5 width with +45 in 3 lug patterns 4x100, 4x114.3 and 5x114.3 (there may be other offsets for the different bolt patterns)
16x7 +50 in the same 3 lug patterns (there may be other offsets for the different bolt patterns)
16x8 +46 came 5x114.3
17x9 +46 came 5x114.3

-euy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by euy &raquo;</TD></TR><TR><TD CLASS="quote">

sorry man but that info is inaccurate....not all mugen wheels are made by rays. oz made some of the race wheels and the M12
</TD></TR></TABLE>

WORD euy. I forgot about the M12's.

EDIT: Before I knew that most Mugen wheels were made by Rays, just from looking at the MR5, M7, MF8, and MF10 I could see the similarities between the Volk Racing line and the Mugen line of wheels.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGeDA9 &raquo;</TD></TR><TR><TD CLASS="quote">EDIT: Before I knew that most Mugen wheels were made by Rays, just from looking at the MR5, M7, MF8, and MF10 I could see the similarities between the Volk Racing line and the Mugen line of wheels.</TD></TR></TABLE>

totally...the similarities between the MF8 and the MF10 to volks TE's and CE's are apparent.

-e

 

WELL THANKS FOR ALL THE INFO GUYS

 

Now where can i find some 5x114's??
Help ME PLEEZE

 

BUMP FOR THIS POST SOME WHAT I JUST GOT MY M7'S AND I AM GOING TO GET THEM REPOLISHED BUT IW AS WONDERING ABOUT THE TORQUE SPEC ON THE BOLTS WHAT ARE THEY???? AND IS THE MUGEN EMBLEM REMOVABLE OR HOW SHOULD I GO ABOUT
CLEANING IT????

 

 

wtf?

I have a 14 year old brochure with the rnr and m7 wheels and full specs. I could scan it in but I dont really feel like it. you can buy it off me if you really want