Crome, Neptune, Uberdata, Hondata Ready socketed ECUs VTEC, non-VTEC
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 3,611
Likes: 3
From: Boston, MA, USA
Crome, Neptune, Uberdata, Hondata Ready socketed ECUs VTEC, non-VTEC
I haven't been doing much on Honda Tech lately, but lots of people know me as I have been doing this for a couple years on and off. Anyways, I have OBDI VTEC and non-VTEC ECUs available for immediate shipment. All ECUs are professionally desoldered and soldered using a Metcal rework station. ECUs include a 4 pin datalogging header for Hondata connectivity as well as Crome, Uberdata, or Neptune datalogging. All ECUs are 100% tested before shipping and are guaranteed against DOA and also carry a lifetime warranty against soldering defects. I use machined pin sockets, high quality solder and genuine Amtel 29C256 chips. A ZIF socket can be added for $8 extra. VTEC ECUs are $112 shipped via USPS Priority Mail, non-VTEC ECUs are $100 shipped via USPS Priority Mail. I can burn a basemap on your chip before shipping. If you would like this service, there is no charge, but please include details of your setup with your payment or via email.
I can also do the 0-5 volt 02 sensor input mod, allowing datalogging the full 0-5V range of the 02 input, rather than the ~3.8V max standard. This mod is an additional $10 and will increase the resolution of your lambda logging.
Genuine Amtel 29C256 ROM chips, the best in the business!
I also sell DIY OBDII-I harness kits for $20 shipped. These include both brand new OBDI and II ends as well as pins to populate the OBDI plugs and shrink tubing. You supply wire, solder, and brain.
Contact info:
Matt Koestner
Email: LateApex31@comcast.net
AIM: LateApex31
PM via Honda-Tech PM system
I don't sell chip burners or any of that other stuff (contact Chris Harris [Xenocron] for other cool goodies like that.
I can also do the 0-5 volt 02 sensor input mod, allowing datalogging the full 0-5V range of the 02 input, rather than the ~3.8V max standard. This mod is an additional $10 and will increase the resolution of your lambda logging.
Genuine Amtel 29C256 ROM chips, the best in the business!
I also sell DIY OBDII-I harness kits for $20 shipped. These include both brand new OBDI and II ends as well as pins to populate the OBDI plugs and shrink tubing. You supply wire, solder, and brain.
Contact info:
Matt Koestner
Email: LateApex31@comcast.net
AIM: LateApex31
PM via Honda-Tech PM system
I don't sell chip burners or any of that other stuff (contact Chris Harris [Xenocron] for other cool goodies like that.
Trending Topics
Founding Member
Joined: Nov 2000
Posts: 12,385
Likes: 0
From: Boston, MA, USA
Re: Crome, Neptune, Uberdata, Hondata Ready socketed ECUs VTEC, non-VTEC (nfn15037)
Unless you want to be banned from HT I would suggest making right with the people you sold ECU/Chips too.
Also the For Sale forums Is NOT a place to sell your goods unless its your own personal stuff, want to sell parts, services, etc.? Advertise like the rest of the shops:
https://secure.rely.net/ht-ads/
LOCKED and -2%
If the people who have contacted me say that you haven't bothered to contact them by Saturday and started to take care of the problem then your banned.
Also the For Sale forums Is NOT a place to sell your goods unless its your own personal stuff, want to sell parts, services, etc.? Advertise like the rest of the shops:
https://secure.rely.net/ht-ads/
LOCKED and -2%
If the people who have contacted me say that you haven't bothered to contact them by Saturday and started to take care of the problem then your banned.
Thread
Thread Starter
Forum
Replies
Last Post
nfn15037
Classifieds: Forced Induction
14
Dec 13, 2005 08:21 AM
nfn15037
For Sale
15
Dec 12, 2005 10:36 PM
specialedition
Honda Prelude
8
May 19, 2005 12:11 AM