Gauging Interest: 10 LED Air/Fuel ratio display kit DIY?
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 4,569
Likes: 0
Gauging Interest: 10 LED Air/Fuel ratio display kit DIY?
On my old Teg, I had a air/fuel display instead of a gauge. It was a kit I bought. I soldered the components on then remote mounted the LEDs into my cluster surround. I still have the schematic for this. I could print up some more circuit boards and include all the needed components. I could either let you solder them in, or for a few extra dollars I could do it.
I like this much better than an A/F gauge because it's unique. Below are some pics and 2 videos. If anyone would be interested in this kit, post up.
Rev: http://www.we-todd-did-racing....DE%3D
Night Run: http://www.we-todd-did-racing....DE%3D
I like this much better than an A/F gauge because it's unique. Below are some pics and 2 videos. If anyone would be interested in this kit, post up.
Rev: http://www.we-todd-did-racing....DE%3D
Night Run: http://www.we-todd-did-racing....DE%3D
Honda-Tech Member
iTrader: (1)
Joined: Aug 2003
Posts: 7,616
Likes: 1
From: Left Coast : High Altitude, Top Floor
Re: Gauging Interest: 10 LED Air/Fuel ratio display kit DIY? (EnjoyTheRideDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">How much you looking for the kit?</TD></TR></TABLE>
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 4,569
Likes: 0
Re: Gauging Interest: 10 LED Air/Fuel ratio display kit DIY? (EnjoyTheRideDC2)
No idea yet, I was just seeing if there was interest first. I'd still need to gather all the supplies, then etch the PCBs.
Honda-Tech Member
iTrader: (1)
Joined: Aug 2003
Posts: 7,616
Likes: 1
From: Left Coast : High Altitude, Top Floor
Re: Gauging Interest: 10 LED Air/Fuel ratio display kit DIY? (JCDubya)
You actually had to etch the PCB? Never seen it this way. I've done it with hard drive cable, LED scanner, 2 resistors, PCB, Nat.Semiconductor drivers, potentiometer, and just soldered wires...i'd be interested to see it etched in...
Honda-Tech Member
Joined: Oct 2004
Posts: 1,068
Likes: 0
From: CA
Re: Gauging Interest: 10 LED Air/Fuel ratio display kit DIY? (JCDubya)
Wow that is very cool. I might be intersted. Post some more info on what in all is involved. What kind of things do you need and how much? Wideband? kit?
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 4,569
Likes: 0
Re: Gauging Interest: 10 LED Air/Fuel ratio display kit DIY? (EnjoyTheRideDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">You actually had to etch the PCB? Never seen it this way. I've done it with hard drive cable, LED scanner, 2 resistors, PCB, Nat.Semiconductor drivers, potentiometer, and just soldered wires...i'd be interested to see it etched in...</TD></TR></TABLE>
Are we on the same page? "Etching" is just the process to make the PCB have all of the "traces" on the bottom that connect the components to one another. It's not hard.
Are we on the same page? "Etching" is just the process to make the PCB have all of the "traces" on the bottom that connect the components to one another. It's not hard.
Thread
Thread Starter
Forum
Replies
Last Post
Integra_Boi
Acura Integra
1
Aug 2, 2002 08:26 PM
