I have some sir-g fog lights for my 96 integra, and i'm going to put them in today. I was wondering if someone could explain to me like what parts to cut on my bumper or something because i have an idea of what i should do but i would rather confirm then mess something up. Pictures / Links would be very much appreciated.

 

bump for this^^....I've been looking for a PDF file....

 

vtec fogs!!

 

Cut the bottom corners of the bumper!!! as showen above

 

^^^^^^^^^

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HeyMikeyyyy &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

is that the Nor Cal hood tilt i see???.....lookin good Mikeyyyy

 

mikeyyyyyyyyyyyyyyyyyyy's car is always a classic

 

 

i know where they go i just dont get like , do i cut the whole little area or what?

 

bump, good question

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GullyFromJerz &raquo;</TD></TR><TR><TD CLASS="quote">i know where they go i just dont get like , do i cut the whole little area or what?</TD></TR></TABLE>

YES!!!!!!

 

So in the bottom portion where there is a little cover, cut a little square and leave the two little holes all the way next to where the paint is and thats where the fogs will bolt to? Someone needs to do a write up? Or a link of an old thread or something.

 

there is no write up of them cause not a lot of people rock them!!!!

 

Cool.

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HeyMikeyyyy &raquo;</TD></TR><TR><TD CLASS="quote">there is no write up of them cause not a lot of people rock them!!!!</TD></TR></TABLE>

i rock them!

 

I never realized what those fogs were, thats hot lookin

 

fog's are hott my boy got a pair he aint using ima tell him to put them on his car lol

 

ok as far as how much cutting is required its not too bad. I bought a really good box cutter from sears and it did GREAT. If you take the bumper off there are small cutouts for the corners of where you need to cut so all you realy have to do is cut in straight lines to connect these precut corners. On one side of the area you are cutting there are small holes that actually hold the foglights in, be sure NOT to cut these out as they are essential to making your foglights fit. So basically just cut the sides in straight lines to connect the corners. Just remember its better to cut not enough than too much and just take your time. Let me know if you need any more help with it.