<U> - S O L D 2 ONE^G -</U>

Here it is i have made my decision and it is time to move on. It's been a fun project and i love the car, however i'm going back to school here soon and need to part as well i need the money. I have invested well over 15K in the car itself not including the price of the car. I purchased the car here on Honda-Tech from (NiftyEJ6) for $5,000 and went from there. It'd be a waste for me to keep b/c i wouldn't be able to drive it to school or work as it would just sit in the garage. Hope you enjoy.

Contact #: (310)408-8953

Make/Model: Honda Civic DX Hatch
Year: 1996
Title: Clean
Mileage: On chassis - 100K / On motor - Approx. 1100 If not less i don't drive it a lot.

&lt;Motor&gt; <U>LS-VTEC</U>
GSR Head: *Signature Series port & polish
*SUPERTECH stainless valves
*dual race springs with titanium retainers
*re-dowl & tap oil line
*new cast guides
*BLOX intake manifold match ported to 70MM
*AEM fuel rail
*AEM fuel pressure regulator
*RC Injectors 440's
*70MM STR Billet Throttle Body
*BLOX Stg 2 Cams
*Ricky's (Industrial-Performance) designed Cam Gears (guranteed not to slip)
*Stock air box for now i'm putting the password power chamber back in it.
*OEM Type R valve cover w/ gasket kit
*PRO FAB Intake Gasket
*COMECTIC Gasket

LS Block:
*Dissasembled bored, honed, decked, and hot tanked
*.40 over ITR Pistons w/ new rings
*LS Rods
*LS Crank
*Crank was blalanced & polished
*Hung pistons
*Narrowed small end of rods
*ACL Race bearings rods & mains
*OEM Timing belt

&lt;TRANNY&gt;
*GSR Case w/ JDM B16 Gears
*CUSCO LSD

&lt;OTHER&gt;
*P28 W/ HONDATA
*AZ Race Mounts
*WALBRO 195 lph Intank Fuel Pump
*99 Si Rear Y Bracket
*BISIMOTO Street Race Header
*Custom 2 1/2 Inxh Exhaust piping by sweeny's muffler
*SPOON N1 Axleback
*INSANE SHAFTS 500 HP Axles

Now for the car it's self.

&lt;EXTERIOR&gt;
*Repainted - Audi Avus Silver
*99-00 Front end conversion
*99 SI Lip
*99 SI Grill
*Brand New 99 Finders w/ Pre Cut Side Markers (Password:JDM)
*Stanley Side Markers
*Carbon Fiber 1 C.F. Hood
*CTR Blacked Out Head Lights
*CTR Style Rear Lip
*99 Hatch Tail Lights
*VIS C.F. Duck Bill
*Vision Type MC C.F. Mirrors

&lt;INTERIOR&gt;
*BRIDE BRIX Reps.
*TAKATA 4 PT. Harnesses Driver & Passenger Side
*JDM ITR Gauge Cluster
*MOMO TUNER Steering wheel
*MOMO Hub
*NRG Quick Release
*6 POINT Chromoly Cage Done by Danny @ PRO MOD
*ITR Shift Boot
*Skunk 2 10th Annv. Shift ****
*Pioneer Head Unit (Not sure the model it's tight thought)
*Pioneer Speakers front/rear

&lt;SUSPINSION/BRAKES/RIMS&gt;
*TEIN SS DAMPERS
*ITR Sway Bars (Not Installed)
*SKUNK 2 Front Camber Kit (Not Installed) Brand New
*SKUNK 2 Rear Camber Kit(Not Installed) Brand New
*OMNI POWER LCA'S (Not Installed) Brand New
*EM RACING 5 Bar Set Up Inside The Car
*EM RACING Lower Tie Bar
*99 SI Rear Brake Conversion
*BREMBO Cross Drilled & Slotted Rotors Front & Rear
*EARLS Steel Braided Lines (Front)
*Hawk Performance Brake Pads
*ARP Extended Wheel Studs
*PASSWORD:JDM 3 Point Strut Tower Bar
*ROTA TE-37 Look Alikes ( I don't know the name i traded some guy for them)
*J's Racing Lug Nuts







<U>PRICE: $10,000 OBO</U>

I'm sure i have left out some good useful information however i suck at this lol so if you have any questions feel free to ask....

****The car has a crappy clutch setup in it right now that probably needs replacing, i have an ACT Xtreme Duty pressure plate that i will throw in with the car...It also needs a speed sensor**** That’s why the price is OBO. ****

Please BUMP this thread if you view. Serious inquires only please.
Thanks Kindly

Modified by EK_HYBRID_ at 1:02 PM 11/6/2005


Modified by EK_HYBRID_ at 1:03 PM 11/6/2005

 

its mine..

 

sweet

 

what happens if the speed sensor isn't installed.

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by one^g &raquo;</TD></TR><TR><TD CLASS="quote">its mine.. </TD></TR></TABLE>
I'll be seeing you tomorrow afternoon.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperDuperFast &raquo;</TD></TR><TR><TD CLASS="quote">sweet</TD></TR></TABLE>
Thanks kindly.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKSuperSi &raquo;</TD></TR><TR><TD CLASS="quote">what happens if the speed sensor isn't installed.</TD></TR></TABLE>
I won't read how fast your going, or milage.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_spoonEG &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
Thanks.

 

DEAL PENDING TO ONE^G

 

for clean car...i would take it myself

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Snoflake &raquo;</TD></TR><TR><TD CLASS="quote"> for clean car...i would take it myself</TD></TR></TABLE>
Thank You...

 

On his way from San Francisco!

 

SOOOOOLLLDDD!

 

wow that was a Fast Sale..

hopefully it goes to a Good Home

 

Seriously i was shocked myself....Yeah i do believe it's found a good home.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EK_HYBRID_ &raquo;</TD></TR><TR><TD CLASS="quote">Seriously i was shocked myself....Yeah i do believe it's found a good home. </TD></TR></TABLE>

good shyt

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SnoFlake &raquo;</TD></TR><TR><TD CLASS="quote">

good shyt</TD></TR></TABLE>
Thanks bro.

 

just got home..
thanks brian!! dont worry.. its in good hands. many plans
ill keep in touch and let you know how everythings going.. tomorrow she gets a new head lining... lsd additive *for the cusco * and complete cleaning of throttle body and intake manifold..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by one^g &raquo;</TD></TR><TR><TD CLASS="quote">just got home..
thanks brian!! dont worry.. its in good hands. many plans
ill keep in touch and let you know how everythings going.. tomorrow she gets a new head lining... lsd additive *for the cusco * and complete cleaning of throttle body and intake manifold.. </TD></TR></TABLE>
Nice.

 

******* deal

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Anthony 417 &raquo;</TD></TR><TR><TD CLASS="quote">******* deal </TD></TR></TABLE>

 

WOW...gj how much did u get for it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slayersluck &raquo;</TD></TR><TR><TD CLASS="quote">WOW...gj how much did u get for it?</TD></TR></TABLE>
9,500 w/ out extra parts.

 

how much power was the car making? (whp)