Post your Ghetto/Homemade Intake's here>>
Thread Starter
Joined: Jan 2005
Posts: 86
Likes: 0
From: Lutz, FL
Post your Ghetto/Homemade Intake's here>>
This is the true ghetto intake setup. Here is my old 91 4dr lx with d16y7 and DPFI 
I used a eg intake pipe with a ek lower pipe to make a ghetto intake. I put rubber fittings and pvc underneath the fittings to make them connect to each other.
I used a eg intake pipe with a ek lower pipe to make a ghetto intake. I put rubber fittings and pvc underneath the fittings to make them connect to each other.
Honda-Tech Member
Joined: Sep 2004
Posts: 2,002
Likes: 2
From: Missoula, MT, USA
Re: Post your Ghetto/Homemade Intake's here>> (Pantysniffer)
That looks good compared to mine.
Ill try to find a picture, but mine now is the stock ZC pipe followed by flex hose to bend around the battery, followed by some plastic tubing, then the filter. I'll try to post a pic of what it was when I first bought the car.
edit: the day I bought the car:
I'll try to post a pic of current setup if I can find one.
Ill try to find a picture, but mine now is the stock ZC pipe followed by flex hose to bend around the battery, followed by some plastic tubing, then the filter. I'll try to post a pic of what it was when I first bought the car.
edit: the day I bought the car:
I'll try to post a pic of current setup if I can find one.
Trending Topics
Joined: Aug 2004
Posts: 214
Likes: 0
From: Newhall, CA, USA
Re: Post your Ghetto/Homemade Intake's here>> (Pantysniffer)
Heres mine
It was made out of PVC from home depot. They elbows were spray painted blue. I probably spent 20 dollars on this. I acually did notice a very slight performance increase.
~AMH
It was made out of PVC from home depot. They elbows were spray painted blue. I probably spent 20 dollars on this. I acually did notice a very slight performance increase.
~AMH
Honda-Tech Member
Joined: Oct 2004
Posts: 822
Likes: 0
From: Finland, Europe, Finland
Re: Post your Ghetto/Homemade Intake's here>> (jdm_916)
Heres mine. Only cost was the filter and a little piece of pipe. No need for supercold intake pipes. This works great also. And i think i have to figure something new, when i install a B18C engine.
Joined: Aug 2004
Posts: 214
Likes: 0
From: Newhall, CA, USA
Re: Post your Ghetto/Homemade Intake's here>> (Pantysniffer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mike Panic »</TD></TR><TR><TD CLASS="quote">why go thru the trouble of jerry-riggin' an intake you can buy off ebay for $30?</TD></TR></TABLE>
because its fun
because its fun
Joined: Nov 2004
Posts: 799
Likes: 0
From: Las Vegas, NV, United States
Re: Post your Ghetto/Homemade Intake's here>> (amh0001)
I use the stock airbox and removed all the restrictive piping up front but used home A/C ducting with 3 aluminum splints held on by metal bands and duct tape for rigidity. K&N filter in the stock airbox. It has a nasty growl now, and only cost me for the filter. I had everything else in a spare parts box in the garage.
Thread Starter
Joined: Jan 2005
Posts: 86
Likes: 0
From: Lutz, FL
Re: Post your Ghetto/Homemade Intake's here>> (amh0001)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by amh0001 »</TD></TR><TR><TD CLASS="quote">
because its fun </TD></TR></TABLE>
hell yea. its fun coming up with ideas for a ghetto intake.
i had made a 2" pvc coldair intake before this one. bought the pvc from homedepot and went to work. didnt really notice a gain, but it was quite loud though.
Modified by Pantysniffer at 6:34 PM 10/30/2005
Modified by Pantysniffer at 6:35 PM 10/30/2005
because its fun
</TD></TR></TABLE>hell yea. its fun coming up with ideas for a ghetto intake.
i had made a 2" pvc coldair intake before this one. bought the pvc from homedepot and went to work. didnt really notice a gain, but it was quite loud though.
Modified by Pantysniffer at 6:34 PM 10/30/2005
Modified by Pantysniffer at 6:35 PM 10/30/2005
Joined: Oct 2005
Posts: 1
Likes: 0
From: beloit, wi, usa
Re: Post your Ghetto/Homemade Intake's here>> (eumoria)
mine the most ghetto of all
my 91 hb with a 1.5 has a 3 in. diameter dryerhose intake that is full of holes with a walmart "performance" air filter sorry i dont have pics but your imagination should give you a good picture
my 91 hb with a 1.5 has a 3 in. diameter dryerhose intake that is full of holes with a walmart "performance" air filter sorry i dont have pics but your imagination should give you a good picture
Honda-Tech Member
Joined: Sep 2005
Posts: 4,265
Likes: 0
From: Sick2Sick Los Angeles, Soul CAL
Re: Post your Ghetto/Homemade Intake's here>> (Pantysniffer)
i just have an intake cone on my throttle body 
thats ghetto.. oh and befor that.. i just bought some drier flex tubing and made it as long as a
CAI would be and put a filter on the end of it.. but mounthed the filted cuz i couldnt mount the piping
cuz it was all "wongo" i guess u can say.. and isnt stable.. lol sorry i dont have pictures
but im just gonna get a AEM one becuz i finnaly got around to getting one from a friend
who got one with his motor.. and the cops talk **** about it.. so i have to get a carb
legal one.. the one i have is like no name from a shop.. but anyways.. thats my intake
thats ghetto.. oh and befor that.. i just bought some drier flex tubing and made it as long as a
CAI would be and put a filter on the end of it.. but mounthed the filted cuz i couldnt mount the piping
cuz it was all "wongo" i guess u can say.. and isnt stable.. lol sorry i dont have pictures
but im just gonna get a AEM one becuz i finnaly got around to getting one from a friend
who got one with his motor.. and the cops talk **** about it.. so i have to get a carb
legal one.. the one i have is like no name from a shop.. but anyways.. thats my intake
