Well...

I have decided to "kill" my project civic. I was attempting to build a track car, but I am giving up due to the escalating cost.

Anyways, I was building a custom oil cooler kit with a Setrab cooler and Earl's fittings and I want to see if anyone interested in buying this kit.

I have everything needed for the install except for the lines. Setrab 19 row cooler, Earl's sandwich adapter, thermostat, and all fittings. Everything is BRAND NEW!!!

I opted for the use of a HAMP oil filter, so this kit does not relocate the oil filter.

Here is a detailed list of what I have and what I paid:

EAR 985010 ~ -10AN TO 7/8 14 CONT (4 X 12.95) = 51.80 (Thermostat fittings)
EAR 829011 ~ 90 -10AN TO 3/8 NPT (2 X 33.53) = 67.06 (Sandwich fittings)
EAR 809110 ~ 90 DEG -10AN SW SL (2 X 26.12 = 52.24 (Cooler Fitting)
EAR 800110 ~ -10AN STRAIGHT SW SL (4 X 11.25) = 45.00 (Thermostat fittings)
EAR 167113 ~ 13/16 LINE SEP BLU = 17.05 (Braided Line Seperators)
EAR 501 ~ OIL THERMOSTAT = 59.34
EAR 517 ~ 20MM X 1.5 SANDWICH ADAPTER = 21.87

SET 619 ~ 19 ROW COOLER = 132.00
SET M22AN10 ~ -10AN ADAPTERS 22MM (2 X 5.40) = 10.80 (Cooler Fittings)

TOTAL PAID: $457.16

Yes, that total is expensive, but these are the best parts money can buy. This Setrab cooler is the same cooler used in Formula 1 and CART racing, so you know the quality is top notch. And of course the Earl's fittings are the BEST on the market.

I have pictures so email me for them. I might post them if I get motivated.

I will take a loss, but not a rediculous amount. Basically, make me an offer...




[Modified by spoonej6, 4:03 PM 3/6/2002]

 

Here are some pics....

Thermostat and Fittings

Oil Cooler and Fittings and Line Seperators

Block Adapter and Fittings



Email me if you have questions...

 

You don't have your email address listed.

 

Oh...

sorry about that..

garthic@hotmail.com


HTH

 

TTT