WTB Misc EK Hatch parts (Seattle Area)
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 86
Likes: 0
From: Seattle, WA
WTB Misc EK Hatch parts (Seattle Area)
I'm in need of a few odds and ends.
Let me know if you have any of the following parts:
Del Sol VTEC A/C compressor mounting bracket
B series IACV (Idle-Air Control Valve)
Bolts for EK rear seats.
(I need all of them)
Particle board cover for rear hatch area
(This is the thing that covers the spare tire)
Screws for center console and arm rest.
Screws to secure guage cluster.
Let me know if you have any of the following parts:
Del Sol VTEC A/C compressor mounting bracket
B series IACV (Idle-Air Control Valve)
Bolts for EK rear seats.
(I need all of them)
Particle board cover for rear hatch area
(This is the thing that covers the spare tire)
Screws for center console and arm rest.
Screws to secure guage cluster.
Honda-Tech Member
Joined: Mar 2004
Posts: 2,342
Likes: 0
From: Mill Creek, WA, USA
Re: WTB Misc EK Hatch parts (ZoobeaR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ZoobeaR »</TD></TR><TR><TD CLASS="quote">Particle board cover for rear hatch area
(This is the thing that covers the spare tire)</TD></TR></TABLE>
Man, they needed to rethink the idea that that board crap was a good choice.
I could use a better replacement for mine. Maybe plexiglass would be better?
Bump for ya.
(This is the thing that covers the spare tire)</TD></TR></TABLE>
Man, they needed to rethink the idea that that board crap was a good choice.
I could use a better replacement for mine. Maybe plexiglass would be better?
Bump for ya.
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 86
Likes: 0
From: Seattle, WA
Re: WTB Misc EK Hatch parts (djnakturnyl)
Any ideas of junk yards that arent stingy with misc bolts?
The place on Rainier across from the taco bus is trying to TAX a brother for a hand full of bolts.
Replied to PMs.
Thanks, fellas.
The place on Rainier across from the taco bus is trying to TAX a brother for a hand full of bolts.
Replied to PMs.
Thanks, fellas.
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 86
Likes: 0
From: Seattle, WA
Re: WTB Misc EK Hatch parts (jdm_ekcivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_ekcivic »</TD></TR><TR><TD CLASS="quote">
Man, they needed to rethink the idea that that board crap was a good choice.
I could use a better replacement for mine. Maybe plexiglass would be better?
Bump for ya. </TD></TR></TABLE>
Yeah, that thing was garbage.
It rotted away due to mildew, due to a bad seal on my tail lamp.
Thanks, Honda.
I was just going to get a new sheet of MDF cut at lowes, but I dont have the piece to make a template from.
Sux.
Man, they needed to rethink the idea that that board crap was a good choice.
I could use a better replacement for mine. Maybe plexiglass would be better?
Bump for ya.
</TD></TR></TABLE>Yeah, that thing was garbage.
It rotted away due to mildew, due to a bad seal on my tail lamp.
Thanks, Honda.
I was just going to get a new sheet of MDF cut at lowes, but I dont have the piece to make a template from.
Sux.
Honda-Tech Member
Joined: Mar 2004
Posts: 2,342
Likes: 0
From: Mill Creek, WA, USA
Re: WTB Misc EK Hatch parts (ZoobeaR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ZoobeaR »</TD></TR><TR><TD CLASS="quote">Yeah, that thing was garbage.
It rotted away due to mildew, due to a bad seal on my tail lamp.
Thanks, Honda.
I was just going to get a new sheet of MDF cut at lowes, but I dont have the piece to make a template from.
Sux.</TD></TR></TABLE>
Mine's still in pretty good shape. I have been meaning to trace mine onto cardboard and seeing what I could cut to replace it.
It rotted away due to mildew, due to a bad seal on my tail lamp.
Thanks, Honda.
I was just going to get a new sheet of MDF cut at lowes, but I dont have the piece to make a template from.
Sux.</TD></TR></TABLE>
Mine's still in pretty good shape. I have been meaning to trace mine onto cardboard and seeing what I could cut to replace it.
Thread
Thread Starter
Forum
Replies
Last Post
jdmstreethatch
Want to Buy
1
Dec 5, 2004 12:35 PM