I just bought an ITR flywheel from a buddy of mine and i was compairing it to my stock flywheel and its alot thinner.. I know that this is from it being stock lightened but i wanted to know if it will bolt onto my B18A1 and still work fine...

My Setup is:

B18A1 Motor
JDM B16A Tranny (35k)
99 ITR flywheel
ACT Stage 3 Street Disc
Extreem Pressure Plate

 

i dunno man id think that it would work but if its thinner hmm the clutch may not go into teh tranny right