GSR LS question

Reply Subscribe

Thread Tools

Search this Thread

Oct 14, 2005 | 09:32 AM

drpepper

Thread Starter

Joined: Sep 2005

Posts: 10

Likes: 0

From: Twin Falls, Idaho, USA

GSR LS question

me and my friend are arguing about swaping a LS header with a GSR header on an LS integra i was just wondering if it would work thanks

Oct 14, 2005 | 09:48 AM

93_teg_CT

Joined: Jun 2005

Posts: 797

Likes: 0

From: Wallingford, CT, USA

Re: GSR LS question (drpepper)

It'd fit the block but would be different lengths.

Oct 14, 2005 | 11:16 AM

zeroz

Junior Member

Joined: Feb 2005

Posts: 647

Likes: 0

From: Ventura, CA

Re: GSR LS question (93_teg_CT)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93_teg_CT »</TD></TR><TR><TD CLASS="quote">It'd fit the block but would be different lengths.</TD></TR></TABLE>

Oct 14, 2005 | 05:31 PM

sPaRk'iT

Member

Joined: Feb 2003

Posts: 2,446

Likes: 0

From: Bay Area/Fresno, Ca, USA

Re: GSR LS question (drpepper)

It'll fit the motor fine but the length is different, GSR header are about 4" shorter then the LS header.

Oct 14, 2005 | 07:00 PM

Padawan

Darth ModerVader

Joined: Jan 2001

Posts: 11,539

Likes: 1

From: Mustafar

Re: GSR LS question (drpepper)

It depends upon the year of the GS-R.

The LS header is completely interchangeable with the '00-'01 GS-R header. However, the '94-'99 GS-R header is approximately 4" shorter than the LS, as mentioned above.