DHRACING CALLING YOU OUT
http://cgi.ebay.com/ebaymotors...25594
this should tell you guys enough about it if you want more pictures of this block or bolts stripped i got supply them. you guys tell me what you think about this all was properly speced out i can actually supply you guys with numbers of what came out of this block after the 625miles of failure. now i dont want to shoot his reputation totally down if he buys it and holds up to his reputation and is responsible about it. If not well then you know do what you think is right i paid 3300$ for this bottom end. there is also problems with my cylinder head one of the exhaust valves doesnt seat. also my head is milled .008 cocked from cylinder 1 to 4... and not angled. so you tell me what you think.
this should tell you guys enough about it if you want more pictures of this block or bolts stripped i got supply them. you guys tell me what you think about this all was properly speced out i can actually supply you guys with numbers of what came out of this block after the 625miles of failure. now i dont want to shoot his reputation totally down if he buys it and holds up to his reputation and is responsible about it. If not well then you know do what you think is right i paid 3300$ for this bottom end. there is also problems with my cylinder head one of the exhaust valves doesnt seat. also my head is milled .008 cocked from cylinder 1 to 4... and not angled. so you tell me what you think.
something like someguy build a block for him, block got fucked . something about being the guy who built its fault. make guy who built buy it back and then . i give up.
Honda-Tech Member
Joined: Feb 2004
Posts: 1,592
Likes: 0
From: not riding any bandwagons in, massachusetts, usa
untainted bought a ported cylinder head from DH racing on ebay, then sent him his GSR block for sleeving, rods, pistons and assembly. bottom end was $3300 and its all pretty much junk. he stripped a rod bolt and a main bolt, the sleeves were 85mm and wavy as hell, bad milling job, scuffed skirts, etc. i got a .020" feeler gauge to slide between the piston and wall. thats like a 2x4.
all untainted wants is a stock block back in trade, nothing else, but DHR is not being cooperative and keeps dodging the subject. he categorically denies even the possibility that there is anything wrong with the work he did.
all untainted wants is a stock block back in trade, nothing else, but DHR is not being cooperative and keeps dodging the subject. he categorically denies even the possibility that there is anything wrong with the work he did.
Honda-Tech Member
Joined: Feb 2004
Posts: 1,592
Likes: 0
From: not riding any bandwagons in, massachusetts, usa
im involved with the owner. this thread should be deleted as it was double posted. the current version is here
https://honda-tech.com/zerothread?id=1400162
https://honda-tech.com/zerothread?id=1400162
Trending Topics
DH RACING SUCKS my brother ordered an LS head from them and it never came.. took 5 months to get his five hundered bucks back. looks like its all good tho, since the **** would have grenaded anyway. they were spending all that time "building it right" and telling us that "quality takes time" HAHAHA
bottom line dhracing is good i know cause my h22 jump up alot in hp so the hell with people who talks crap.these are the kind of people who have nothing else to do but talk ****!
Thread
Thread Starter
Forum
Replies
Last Post
sivtechatchy
Acura RSX DC5 & Honda Civic EP3
9
Jan 13, 2020 11:03 AM
wunfstgsr
Tech / Misc
3
Dec 13, 2009 07:51 PM
untainted
All Motor / Naturally Aspirated
379
Dec 11, 2008 05:06 PM
VTgringo
Honda CRX / EF Civic (1988 - 1991)
2
Dec 24, 2003 09:48 PM



