FS: Built B16 head, Toda/Skunk2/Portflow
Thread Starter
Member
Joined: Feb 2002
Posts: 3,893
Likes: 0
From: Left Coast., CA, usa
FS: Built B16 head, Toda/Skunk2/Portflow
Built B16 head (contains the following)
-Decked, 3-angle valve job, gasket matched. tested and hot tanked.
-Toda Dual Valve Springs
-Skunk2 Hi-comp valves
-Portflow Retainers
-Honda valve seats
-Stock PR3 cams w/ stock cam gears w/ be included. (not recommend that u run them, but ill throw them in.)
No valve cover, never had one. Still in the bag from the shop, this is a older PR3 head, year=1990. but IT IS brand new with this rebuild. $850obo.
work was done at Speed-o-motive in west covina, more of a domestic car shop, but starting to do imports, friend works there so yeah.
FOR THE BUYER. They will recieve this head, Stock B16 cams/cam gears, Stock B16 IM, I would include more stuff for it, but thats all I got. Looking for local unless you are willing to pay for the shipping totally. Shipping I believe will cost around $70 just for the head, might be even more, If you want the IM itll be more also. So please take into consideration that shipping will be quite a bit.=========|>
Just to let the buyers know. If you are not local you will have to pay for the shipping and an offer like $800 shipped or even $850 shipped would not cover it.
The head is big as you know and heavy, and fragile, we would not want it to break now. So packaging would have to be crucial and if you would like it to be packaged cheaply and sent cheap because it saves you money, I cant do that.
Im sure if it is damaged I would be the one to be blamed.
So please take into consideration that Shipping is involved and I also would like you to help me out a little with the paypal fees, if not, then money orders are fine also and I have many vouches here, on ebay, and on gixxer.com.
Thank you and if you are interested, please offer me an offer and consider shipping.
in the bag still, will be opened to take pics.
most of the head.
dykem? haha..ok
showing the portflow retainers, and the toda valve springs are obviously under those.
Modified by xpsonic at 11:11 PM 10/24/2005
Modified by xpsonic at 10:10 AM 11/10/2005
Modified by xpsonic at 5:48 PM 11/10/2005
-Decked, 3-angle valve job, gasket matched. tested and hot tanked.
-Toda Dual Valve Springs
-Skunk2 Hi-comp valves
-Portflow Retainers
-Honda valve seats
-Stock PR3 cams w/ stock cam gears w/ be included. (not recommend that u run them, but ill throw them in.)
No valve cover, never had one. Still in the bag from the shop, this is a older PR3 head, year=1990. but IT IS brand new with this rebuild. $850obo.
work was done at Speed-o-motive in west covina, more of a domestic car shop, but starting to do imports, friend works there so yeah.
FOR THE BUYER. They will recieve this head, Stock B16 cams/cam gears, Stock B16 IM, I would include more stuff for it, but thats all I got. Looking for local unless you are willing to pay for the shipping totally. Shipping I believe will cost around $70 just for the head, might be even more, If you want the IM itll be more also. So please take into consideration that shipping will be quite a bit.=========|>
Just to let the buyers know. If you are not local you will have to pay for the shipping and an offer like $800 shipped or even $850 shipped would not cover it.
The head is big as you know and heavy, and fragile, we would not want it to break now. So packaging would have to be crucial and if you would like it to be packaged cheaply and sent cheap because it saves you money, I cant do that.
Im sure if it is damaged I would be the one to be blamed.
So please take into consideration that Shipping is involved and I also would like you to help me out a little with the paypal fees, if not, then money orders are fine also and I have many vouches here, on ebay, and on gixxer.com.
Thank you and if you are interested, please offer me an offer and consider shipping.
in the bag still, will be opened to take pics.
most of the head.
dykem? haha..ok
showing the portflow retainers, and the toda valve springs are obviously under those.
Modified by xpsonic at 11:11 PM 10/24/2005
Modified by xpsonic at 10:10 AM 11/10/2005
Modified by xpsonic at 5:48 PM 11/10/2005
Thread Starter
Member
Joined: Feb 2002
Posts: 3,893
Likes: 0
From: Left Coast., CA, usa
Re: FS: Built B16 head, Toda/Skunk2/Portflow (sPaRk'iT)
tempting, but i really want cash so i can payoff some of my credit card bill. got a bike now, so i got something as fast as i need.
