Hey guys. I just bought an '88 Kawi stand-up JetSki, and it came on a brand-new single trailer. In the past, my dad and I made a bike trailer using one side of a double SeaDoo trailer, and it worked great, but this single is angled differently ... at least the depth is different.

Does anyone here use a JetSki trailer as a bike trailer, too? If so, any advice/suggestions/photos that may help me fabricate this one up?

I have a good idea where to start, but wanted to check first to see if anyone else already was doing this ... and if it works well.

Thanks in advance.

Taylor

 

I don't have any pics buy I did this to my single jetskit trailer. I just used U bolts to bolt down a board strait up the middle of the traier. It worked great and i was able to leave the board on while the jetski was on the trailer also bc the board sat low enough.

 

Ah, good idea and that alleviates the switching up I was concerned with. How wide a board did you use, and what kind of bike do you transport?

Thanks for the reply

 

it was 8-12 inches long i don't remember. It was used for my dirtbike but i hauled my uncle's kawi cruiser on it twice and it worked great