I just picked up a set of 310cc RC Injectors and I'd like to know if there's anyway to test them to make sure they work. Someone told me that with an OHM Meter I can test them... is this true?

 

Sure. You have to know the amount of resistance that the injectors are supposed to flow. If you don't know that, then you can't do that test.

Are there any machine shops by you? Most machine shops will test them...for a small fee of course.

 

Well, I really don't know the amount of resistance that the injectors are supposed to flow... They're RC 310's... anyone have any idea?

 

RC 310cc saturated injectors should measure betweek 12-16 oHms. (measured at 43 psig.)

 

Not to sound retarded but are my injectors saturated? Its a 93 DA (OBD1)... People that I know are stupid and I get different answered from everybody.

 

I think they suppose to be 14-16 ohms.
set ur meter to measure ohms an meause them badboys

 

It's not a bad idea to get them tested, and checked out if they are used. I didn't have any shops locally that could do this, so I sent them to a company in OK. Cost me about $50 for what I needed done.