What back spacing do I need for A EG chassis and what size 13x8 or 13x9's
and if you have any pics.

Thanks

 

anybody?

 

Either 24.5 or 25's from M&H, so if I run a 4" backspace then I shouldn't need a spacer then.

What chassis are you running ?

 

does any one know what backspacing you need to clear gsr brakes with the welds

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LsVTeCTuRBo17 &raquo;</TD></TR><TR><TD CLASS="quote">does any one know what backspacing you need to clear gsr brakes with the welds</TD></TR></TABLE>

Not sure on the welds but, I had a 4" backspacing on my Bogarts and they cleared everything fine w/o a spacer.

Phil

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaguyef &raquo;</TD></TR><TR><TD CLASS="quote">

Not sure on the welds but, I had a 4" backspacing on my Bogarts and they cleared everything fine w/o a spacer.

Phil</TD></TR></TABLE>


Ya I got sick of waiting for a response, so I just went out and measured myself to be sure. thanks tho.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dragline &raquo;</TD></TR><TR><TD CLASS="quote">


Ya I got sick of waiting for a response, so I just went out and measured myself to be sure. thanks tho. </TD></TR></TABLE>

what did you come up with???? i want to by some weld wheels also for my si but i dont know what back sapcing to get

 

I came up with 4"

 

thanks. is there any drawbacks for going with higher like 5 or 6

 

to clear a 4 lug weld magnum on gsr brakes youll need a small like 1/4 spacer or grind the crap out of the caliper and the backside of the wheel.