Hey guys i checked on the faq's and i didn't find it and i just saw it like 2 weeks ago, anyone got the link to it, thanks

 

All you have to do is take off the 4 accorn nuts that hold on the wing. Then you can either use washers or you can just use two of the accorn nuts to shim the wing. Either way, you have to do it to the two nuts that are closest to the rear of the car. Use how ever many washers you want to get the desired pitch. I personally just used the accorn nuts to shim it up. Just put the two rear nuts on the stems before you mount the wing back on the car. Then just use the front two nuts to secure it to the car. It has a nice angle and the wing is plenty secure with just the two front nuts holding it on.

 

have any pics of this? sounds interesting.

 

Yeahh, i was bored and tried it...actually turned out pretty cool. I like it, and i'll post some pics today if it stops raining

 

umm i wonder how does this look

 

i did on my hatch and it looked like crap.

 

look here for a shocking answer.

http://topendmotorsports.com/e....html

 

https://honda-tech.com/zerothread?id=1373089

Here ya go...here is the link to the origional thread ...has some good pics in there

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaFerris &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=1373089

Here ya go...here is the link to the origional thread ...has some good pics in there </TD></TR></TABLE>i was trying to find tha tread but couldnt

 

Yeah I was bored and did it to my 90 ef hatch 2 weeks ago personally I like it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ef-hatchcrap &raquo;</TD></TR><TR><TD CLASS="quote">Yeah I was bored and did it to my 90 ef hatch 2 weeks ago personally I like it </TD></TR></TABLE>same here, though i need to get rid of the constant raddle back there now since doing this, lol.

 

is there any way to mod the sides when u shim up the stock wing ...i just tried it and it looks good but the gap on the sides that bothers me alot and i was wonderinf ig i could weld a piece there to flow on the hatch or something

 

I've never seen anybody mod the sides but im sure you could do it with some time and effort...If you can get a spare wing itd be cool to experiment on.

 

i already have 2 spare spoliers to mess with tho

 

i like it,cheapest mod i've done sofar , but my only concern is, wouldn't rain get into our back hatch now?

 

https://honda-tech.com/zerothread?id=1373089

 

i already read that thread, and it still doesn't answer my qustion.

 

well wut is your question

 

wouldn't rain get into the back hatch now?

 

I tried it on my hatch and it doesn't look to bad IMO and no, rain does not get in. Btw has anybody ever seen an aftermarket duckbill for an EF as listed in the link above?

 

i'm thinking about doing this but mod the sides to flow the body perfectly

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkipMic2006 &raquo;</TD></TR><TR><TD CLASS="quote">i'm thinking about doing this but mod the sides to flow the body perfectly </TD></TR></TABLE>

do it take some pics and let us know how you make out.

 

I just did this a few hours ago to my car. It took all but 5-10 minutes. It Was Very

Simple, I didn't use any wasthers though, I just put the bolt back on the studs. The

Wing/Spoiler what ever you call it doesn't rattle at all either.

Job Well Done