I have searched and read mixed reviews and answers, but i need a for sure correct one.
Im wanting to get a traction bar, Del sol vtec radiator and JDM ITR header. Shopping for traction bars i think the JimFab is best for money and quality. Some people have said with the HCP mounts, the JDM ITR header will clear the traction bar.
Is this true?? I know on the JimFab website it says it wont clear them, but a few people have said that with the HCP mounts it will. Since they set the motor back a bit.
Looking for people with real experience with it....

pic for hits

 

anyone?

 

i love my lcon traction bars, 6 months no problems. A few others have had problems though. Full race is another option, expensive but very nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PURPLETERROR aka BIGMATT &raquo;</TD></TR><TR><TD CLASS="quote">i love my lcon traction bars, 6 months no problems. A few others have had problems though. Full race is another option, expensive but very nice</TD></TR></TABLE>

Yeah i would like a full-race but its just too expensive for me.
What problems have people had with there l-con? Doesnt it mount to the shock fork instead of the stock place?
Whats the ground clearence like?? Any pics?

 

bbummppp!

 

No wipers........and you're from bama? Isn't that risky?

&lt;--------Has full-race and plenty of room for whatever in the world I want.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88 rex &raquo;</TD></TR><TR><TD CLASS="quote">No wipers........and you're from bama? Isn't that risky?

&lt;--------Has full-race and plenty of room for whatever in the world I want.
</TD></TR></TABLE>

Carry one with me in the car

 

I have a jim-fab bar and an itr header in my crx with hasport mounts. It is very close. When I bolted it up the header was maybe 1.5 mm from the bar. after a little driving the mounts must have settled and now there is about 5 mm of room.
I can get you some pics next week when I get my car back.



Thats all I have for now you can see the header. Also it is a really tight fit just so you know.
-James-

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C5crx &raquo;</TD></TR><TR><TD CLASS="quote">I have a jim-fab bar and an itr header in my crx with hasport mounts. It is very close. When I bolted it up the header was maybe 1.5 mm from the bar. after a little driving the mounts must have settled and now there is about 5 mm of room.
I can get you some pics next week when I get my car back.
-James- </TD></TR></TABLE>

Sweet, guess i'll go ahead and get it.

Anyone know where to find the best deal on a jimfab?

 

Craigslist, Ebay.. i don't know of anyone "reselling" jimfab.
For a long time he was considering closing up shop. Get em while you can

 

i have hasport mounts too, and a jimfab bar, but when i tried to install the jdm itr header, it hit the bar. so it wouldnt work for me

its possible that the reason it works for b18c5rex and not me is that i have a b18c and he has a b16

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GSRCRXsi &raquo;</TD></TR><TR><TD CLASS="quote">i have hasport mounts too, and a jimfab bar, but when i tried to install the jdm itr header, it hit the bar. so it wouldnt work for me

its possible that the reason it works for b18c5rex and not me is that i have a b18c and he has a b16</TD></TR></TABLE>

How close was it? Hmm i have a b16 i may be in luck

 

ttt

 

bump

 

how close was it? about 0mm. lol like i said it was touching the bar. i couldnt fully install the jimfab bar when the header was on.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GSRCRXsi &raquo;</TD></TR><TR><TD CLASS="quote">how close was it? about 0mm. lol like i said it was touching the bar. i couldnt fully install the jimfab bar when the header was on.</TD></TR></TABLE>

Hehe, i meant like, could i dremel a lil bit off the header or traction bar and get it to work??

 

not sure. i might sell my jimfab soon though, i want a full race

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GSRCRXsi &raquo;</TD></TR><TR><TD CLASS="quote">not sure. i might sell my jimfab soon though, i want a full race </TD></TR></TABLE>

Really? If u already have a traction bar...what makes the full-race so much better to go through all the trouble??
Just asking cause im "shopping" for one.
The full-race is nice but pretty pricey, guess i should just suck it up and pay it.

 

hmmm...i wanna relocate my battery too, cleans up the bay nicely (sorry for bein off topic )

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16crxkid &raquo;</TD></TR><TR><TD CLASS="quote">Really? If u already have a traction bar...what makes the full-race so much better to go through all the trouble??
Just asking cause im "shopping" for one.
The full-race is nice but pretty pricey, guess i should just suck it up and pay it. </TD></TR></TABLE>

full-race is stronger, is easier to adjust, and provides more clearance.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DUFFM4N &raquo;</TD></TR><TR><TD CLASS="quote">hmmm...i wanna relocate my battery too, cleans up the bay nicely (sorry for bein off topic )</TD></TR></TABLE>

haha i dont care man. THANKS. Pm me if u want some wire tuck info.

 

shiza you'll dent that 4-1 header for sure


don't say you weren't warned, make a skid plate for it asap

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16_madman &raquo;</TD></TR><TR><TD CLASS="quote">shiza you'll dent that 4-1 header for sure


don't say you weren't warned, make a skid plate for it asap</TD></TR></TABLE>

***** please, you know i got it covered!

http://estores.merchantpartner...id=90





YAY i cant wait. No more crushed to hell dc 4-2-1 ****

 

does that plate come too close to the oil pan? if not then that could be just what i need

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stdefhatch &raquo;</TD></TR><TR><TD CLASS="quote">does that plate come too close to the oil pan? if not then that could be just what i need </TD></TR></TABLE>

I dunno if it does, u can trim it easily.