Axle System axles for Honda/Acura with or without swap!!
Thread Starter
Honda-Tech Member
Joined: Mar 2005
Posts: 878
Likes: 0
From: Nor Cal
Axle System axles for Honda/Acura with or without swap!!
Hey everyone,
Just became an authorized dealer today for one of my sponsors: The Axle System.
Higher grade stock replacement (Stage 1) for: B, H, and K series engine swaps. Stock replacement series are made for drag racing with a 2.00 sec 60 ft or more on a street slick. ASI Stage 1 axles are compatible with various engine mounts such as ENJO, HASPORT, etc. Stage 1 up to 300 WHP.
Stages 2-4 are full race compatible. Stage 2 up to 400 WHP.
Stage 3 and 4 are Hub and Axle combo. These axles have neoprene boots, stainless steel high tensile strength bands and have outer cv joints that contain stronger billet single arc design ball tracks.The internal components are higher grade quality than original equipment replacement internal components. Our center bars are made of 4340,or 300M material, double tempered stress relieved, along with 300M plug. Stage 3 up to 500 WHP, and Stage 4 up to 700 WHP.
The warrenties are as follows:
Stage 1 and 2: 6 months or a discount if you step up to the next stage.
Stage 3 and 4: 1 year to repair/replace any damage parts.
Here is a link to their website also: http://www.axlesystem.com
PM or call for prices and stock on hand.
If you have any questions, please feel free to PM me or give me a call: 510-459-7229.
Thanks,
Jason
Just became an authorized dealer today for one of my sponsors: The Axle System.
Higher grade stock replacement (Stage 1) for: B, H, and K series engine swaps. Stock replacement series are made for drag racing with a 2.00 sec 60 ft or more on a street slick. ASI Stage 1 axles are compatible with various engine mounts such as ENJO, HASPORT, etc. Stage 1 up to 300 WHP.
Stages 2-4 are full race compatible. Stage 2 up to 400 WHP.
Stage 3 and 4 are Hub and Axle combo. These axles have neoprene boots, stainless steel high tensile strength bands and have outer cv joints that contain stronger billet single arc design ball tracks.The internal components are higher grade quality than original equipment replacement internal components. Our center bars are made of 4340,or 300M material, double tempered stress relieved, along with 300M plug. Stage 3 up to 500 WHP, and Stage 4 up to 700 WHP.
The warrenties are as follows:
Stage 1 and 2: 6 months or a discount if you step up to the next stage.
Stage 3 and 4: 1 year to repair/replace any damage parts.
Here is a link to their website also: http://www.axlesystem.com
PM or call for prices and stock on hand.
If you have any questions, please feel free to PM me or give me a call: 510-459-7229.
Thanks,
Jason
Thread
Thread Starter
Forum
Replies
Last Post
Innes
For Sale
14
Dec 13, 2010 08:20 AM
