I finally made it into the 11s allmotor
92 EG full interior street car on pump gas
stock K24a2 with Crower s2.75 cams, springs, rts, and values (no milling or thin HG)
11.8@113
I have been having traction problems all year with MT24.5x8x13 slicks running 6psi and 4500rpm launch. After a call to M&H and a set of 25x8.7x13, 11s are coming all the time now. I cant wait to see what it does with a built bottom end.
stock K24a2 with Crower s2.75 cams, springs, rts, and values (no milling or thin HG)
11.8@113
I have been having traction problems all year with MT24.5x8x13 slicks running 6psi and 4500rpm launch. After a call to M&H and a set of 25x8.7x13, 11s are coming all the time now. I cant wait to see what it does with a built bottom end.
I shift at 8000 in first and 7700 in the other four gears. 1.72 on the 60ft but I know it can pull a 1.6 60. I got lots of 1.70 and 1.71 60s last year with the 24.5x8 slick you see in that pic. Last night was my first time out on the new 25s and I was being very conservative on RPM and tire PSI because Im still running stock axles.
I highly recommend these M&Hs
I highly recommend these M&Hs
Trending Topics
Here is the setup..
stock K24a2 short block
stock k24a2 head (no milling or thin gasket)
crower s2 3/4 cams (40 VTC), springs, RTs, and valves
Accord type-R intake mani with an overbored USDM Accord TB
550 RCs on a stock rail
Kpro
4-1 header with 1 7/8 primaries we made
stock type-S tranny with LSD
stock axles with Bseries outers
25x8.7x13 M&Hs (I love these tires!!)
Stock rear arms
car is about 1980lbs without me in it and I am 200lbs
oh and it runs on 91oct gas :D
stock K24a2 short block
stock k24a2 head (no milling or thin gasket)
crower s2 3/4 cams (40 VTC), springs, RTs, and valves
Accord type-R intake mani with an overbored USDM Accord TB
550 RCs on a stock rail
Kpro
4-1 header with 1 7/8 primaries we made
stock type-S tranny with LSD
stock axles with Bseries outers
25x8.7x13 M&Hs (I love these tires!!)
Stock rear arms
car is about 1980lbs without me in it and I am 200lbs
oh and it runs on 91oct gas :D
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Suprdave »</TD></TR><TR><TD CLASS="quote">Nice...What kinda power does it make?</TD></TR></TABLE>



. That is just insane. Keep it up dude. 