will these cams produce hp? if so how much? i have a 92 integra ls and i was looking to buy these cams within the next few days. so if you guys could tell me how these work for you too? good acceleration? thanks

 

you will deffinatly notice a diffrence in power and sound from about 4000rpm all the way up to redline.

crower claims about 20hp peak. which is about right when proerly tuned.

 

I saw a post from a guy who already had i/h/e and maybe something else and he got 18 whp over stock with the 403's... which is exactly what crower claims I think. I was very impressed. I'm not sure if he raised his redling though, but with new crower springs and retainers I don't think it would be too terrible to bump your redline up to 7500 or so. Don't take my word for it though.

 

Make sure you get Crower's valve springs and retainers that match the 403's. The 403's require them. I would not recommend getting cams without them.

Just FYI, the 402's are the highest you can go in Crower without NEEDING their springs/retainers. They recommend them, but it's not absolutely necessary. After that, you need them.

 

Word of caution... in case you haven't heard... CROWER's valvetrain products for the VTEC motors blow... I have personally seen broken cams... and I am now expierenceing a broken Titanium retainer from them... I would look into other cams/valvetrain products if you don't want your motor to look like mine...
http://www.tamparacing.com/hebb/show...threadid=19543