Rotary Vale System
Thread Starter
Joined: Oct 2004
Posts: 115
Likes: 0
From: 619, CA, USA
Rotary Vale System
Been watching this product for a couple years. Did search, didn't find anything here. Some interesting stuff.... BTW.. I am sure someone here has heard of them.
http://www.coatesengine.com/
I even went as far as seeing if there were any Honda apps. for the future... yes this is dated (April 21, 2003) but its a response:
Mr. XXXXX, your April 7th email was received, and it is a pleasure to hear from you. The worldwide patented and protected CSRV system has not been made available to the motoring public. No pricing sheets or product catalogs have been assembled since the auto program is "on a temporary hold" so that all our energies can be dedicated to mating the CSRV system with a line of large industrial engines which will run on a variety of fuels. The total cost of producing one set of heads for the 4-cylinder Honda engine would likely exceed five hundred thousand dollars, but the company is not set up to manufacture "one of a kind" motors for single consumers. About all that can be suggested at this time is that you consider periodic visits to website http://www.coatesengine.com to watch for postings which will inform the public of changes in our product development schedule. Thank you for contacting the Coates organization.
Sincerely,
Dr. Richard Evans
Director
http://www.coatesengine.com/
I even went as far as seeing if there were any Honda apps. for the future... yes this is dated (April 21, 2003) but its a response:
Mr. XXXXX, your April 7th email was received, and it is a pleasure to hear from you. The worldwide patented and protected CSRV system has not been made available to the motoring public. No pricing sheets or product catalogs have been assembled since the auto program is "on a temporary hold" so that all our energies can be dedicated to mating the CSRV system with a line of large industrial engines which will run on a variety of fuels. The total cost of producing one set of heads for the 4-cylinder Honda engine would likely exceed five hundred thousand dollars, but the company is not set up to manufacture "one of a kind" motors for single consumers. About all that can be suggested at this time is that you consider periodic visits to website http://www.coatesengine.com to watch for postings which will inform the public of changes in our product development schedule. Thank you for contacting the Coates organization.
Sincerely,
Dr. Richard Evans
Director
Honda-Tech Member
Joined: Jan 2004
Posts: 3,914
Likes: 1
From: Charlotte, NC
Re: Rotary Vale System (ShortBusTechnologies)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShortBusTechnologies »</TD></TR><TR><TD CLASS="quote">The total cost of producing one set of heads for the 4-cylinder Honda engine would likely exceed five hundred thousand dollars</TD></TR></TABLE>
1. A set of heads for a 4 cylinder Honda is 1 (one) head.
2. Anyone who needs half a million dollars to make a damn head for a Honda is retarded. If Dart can make an entire block for $2,000 or whatever the hell they are, I'm sure some halfway competent engineers can come up with a 4 cylinder head for a reasonable cost.
1. A set of heads for a 4 cylinder Honda is 1 (one) head.
2. Anyone who needs half a million dollars to make a damn head for a Honda is retarded. If Dart can make an entire block for $2,000 or whatever the hell they are, I'm sure some halfway competent engineers can come up with a 4 cylinder head for a reasonable cost.
Thread
Thread Starter
Forum
Replies
Last Post
kamran075
Honda Minivans, Crossovers, and Trucks
1
Mar 27, 2017 03:58 PM
