We received our shipment of the new Garrett T3/T4 BallBearing CHRA's yesterday!!
Much sooner than expected.

The new CHRA is ment to be used as a direct replacement of your existing journal bearing CHRA, with the same compressor and turbine wheel to retain your existing housings.
We will also be offering these as complete assemblies for those that do not have a journal bearing turbo currently.



We are just putting the finishing touches on the first BallBearing T3/TO4R as i type this

edit: pricing isn't half as bad as we expected.

 

Badass

 

price..?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhoenixTurbo.com &raquo;</TD></TR><TR><TD CLASS="quote">

We are just putting the finishing touches on the first BallBearing T3/TO4R as i type this

edit: pricing isn't half as bad as we expected. </TD></TR></TABLE>

How much?

 

are they offering straight t4 bb chra's?

 

quit teasing, and give a price y0

 

 

how much?

 

Interesting. Are these turbine wheels of the GT design or are they the older T3 'stage 3' wheels with ball bearings?

 

sorry guys, i just got swamped with PM's and phone calls on these...

we will be offering the BB T3/To4E chra replacements at an introductory price of $799, price good until 10/14/05.
complete assemblies also available with compressor and 4bolt Garrett turbine housing for only $1049 until 10/14/05.

should have the BB "Blowzilla" (sc61), and BB TO4R "Big Kahuna" pricing ready to go tomorrow.

Ken

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99_GS-T &raquo;</TD></TR><TR><TD CLASS="quote">Interesting. Are these turbine wheels of the GT design or are they the older T3 'stage 3' wheels with ball bearings?</TD></TR></TABLE>

they are still the old "T" technology

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhoenixTurbo.com &raquo;</TD></TR><TR><TD CLASS="quote">sorry guys, i just got swamped with PM's and phone calls on these...

we will be offering the BB T3/To4E chra replacements at an introductory price of $799, price good until 10/14/05.
complete assemblies also available with compressor and 4bolt Garrett turbine housing for only $1049 until 10/14/05.

should have the BB "Blowzilla" (sc61), and BB TO4R "Big Kahuna" pricing ready to go tomorrow.

Ken</TD></TR></TABLE>

Now those are gonna be some bad *** turbos!!!! Think about a Dual BB T3/T67 DOH! Also keep in mind these turbos will be less expensive than Turbonetics single ceramic ball bearing turbos and also less than ITS turbos. FYI

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

Now those are gonna be some bad *** turbos!!!! Think about a Dual BB T3/T67 DOH! Also keep in mind these turbos will be less expensive than Turbonetics single ceramic ball bearing turbos and also less than ITS turbos. FYI
</TD></TR></TABLE>


DANNNNNNNNGNGNGNNGNGNGNGNGNGNGNGNNGNG.... I need one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

Now those are gonna be some bad *** turbos!!!! Think about a Dual BB T3/T67 DOH! Also keep in mind these turbos will be less expensive than Turbonetics single ceramic ball bearing turbos and also less than ITS turbos. FYI
</TD></TR></TABLE>


terry, this answered my question from last month!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtekthis &raquo;</TD></TR><TR><TD CLASS="quote">


terry, this answered my question from last month! </TD></TR></TABLE>

Buy Mr Barone BUY!!!! Contact me or Ken

 

just finished up the first T3/TO4R w/.82 a/r P-trim, for our EVO8 R&D car

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhoenixTurbo.com &raquo;</TD></TR><TR><TD CLASS="quote">just finished up the first T3/TO4R w/.82 a/r P-trim, for our EVO8 R&D car
</TD></TR></TABLE>

is that the same thing *** the t3/t67 h.o.?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vaporboy12 &raquo;</TD></TR><TR><TD CLASS="quote">

is that the same thing *** the t3/t67 h.o.?</TD></TR></TABLE>

What do you think Bret? Read that again!!!! Wait till I see you, my hand is gonna be red and hurting from slapping you sooo hard!!!

 

just intime if I wanted to rebuild my SC61

 

i was just asking a question terry gosh!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vaporboy12 &raquo;</TD></TR><TR><TD CLASS="quote">is that the same thing as the t3/t67 h.o.?</TD></TR></TABLE>

same thing , but Ball Bearing

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhoenixTurbo.com &raquo;</TD></TR><TR><TD CLASS="quote">

same thing , but Ball Bearing </TD></TR></TABLE>

Ken, I think I already answered that for Bret! lol


Edit:They call it teh HO version with the P trim and now it will be the HOR hahahaha HO and HOR get it? Ok I'll shut up now

 

Yummy!!!! And I thought my SC61S already spooled fast... MWAHAHAHA Might have to add this into the budget

 

I am definetly going to take advantage of this.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">
Edit:They call it teh HO version with the P trim and now it will be the HOR hahahaha HO and HOR get it? Ok I'll shut up now</TD></TR></TABLE>

LOL you did another funny huh? lol