Hey guys, I was looking in my Chilton for installation instructions, but it dosn't mention that you need to lift the car on jack stands. Yesterday I was looking at what I need to do to remove the alternator and It looks like raising the car is needed because I have alot of wires in the way. Any suggestions.. 91 civic dx sedan (auto).

 

remove the master cylynder, thats how i did it

 

I jacked up my CRX and went underneath. Had to take off the alternator mounting bracket and removed the alternator from down under.

 

Slipped mine from the bottom. May need to take the axle out but you shouldn't need to. Just takes a little twist and turning.

-Jon