Notices
Vehicles for sale Post vehicles for sale only

LIEN SALE/HIS LOSS YOUR GAIN crx lots of extras - we make deals on this

Thread Tools
 
Search this Thread
 
Old Sep 7, 2005 | 10:48 AM
  #1  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default LIEN SALE/HIS LOSS YOUR GAIN crx lots of extras - we make deals on this

Car has been at the shop for over 18 months, didnt want to but had to lien sale it. The balance was huge but need room to work and cant keep moving it in and out everyday.
Year - 1991 si
Vin - JHMED9369MS009853
Milage - 149655.4 ( cant be sure on this, just took this off the cluster )
Plates - no plates but we will supply when we sale the car to YOU 12.00 at the DMV
ASKING - 10,000 with new b16 bottom end
8,500 with stock bottom end
4,000 rolling shell
The Lien sale was completed last week and we have all the paper work in house and ready for you to look at if you would like.

Car info - ( has )

350z blue paint ( 2 small scratches one on wing and one on door )
Wings west kit w/wing ( front bumper not mounted very good )
JDM front conversion ( headlights need to be wired )
Stock interior and only 1 factory seat, has most of the plastics and carpet and door panels ( black )
DFI Gen 6
MSD Digital 6 w/2 step switch wired and ready
Optima 925 battery and tray
YS1 trans
Quiefe LSD
ACT clutch kit ( not sure which one )
Factory 90 integra axles and half shaft
ARP wheel studs ( front only )
Skunk2 Lugs all around
Rotos ( 16inch )
MSD inline pump ( 225 )
Holly intank pump ( 255 )
B16 head ( omni valves springs and retainers )
GSR cams
Cometic headgasket
ARP headstuds
B16 sleeved and built block --------- SPUN BEARING SPUN BEARING, but we can work out the bottom end. We can fix or drop price or replace with a new motor stock or built.
Custom Rage Stainless turbo manifold
Stainless 3.0 inch downpipe
Turbonetics T3T4
XS 24x11x3 cooler and endtanks
2.5 turbo piping all chromed
AEBS intake manifold chromed and cleaned up
Type r throttlebody polished
STR fuel rail
RC 750 cc injectors
Fluidyne CIVIC EG radiator
PlaceRacing crossmember

Car made 405 @ 20lbs before the block failed - so with a good bottomend this thing would be great -

Price depends on how car is sold w/ or w/o engine etc we will part car and engine parts. We will repair the block for sale. We can sale the shell and then the remaining parts. Trades are option too - Here's a few pictures to show I will check this every few days and if you want more/better pics let me know.














Old Sep 8, 2005 | 06:49 AM
  #2  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: LIEN SALE/HIS LOSS YOUR GAIN crx lots of extras - we make deals on this (Jason@Rage)

We are open for any deals - need this thing gone, huge loss of money and time for us.
Old Sep 9, 2005 | 11:33 AM
  #3  
portenio78's Avatar
Honda-Tech Member
iTrader: (1)
 
Joined: Sep 2001
Posts: 1,485
Likes: 2
From: Marshfield, MO, us
Default Re: LIEN SALE/HIS LOSS YOUR GAIN crx lots of extras - we make deals on this (Jason@Rage)

Seen this ride at Rage...who ever jumps on this is coming up for sure!!! BUMP.
Old Sep 11, 2005 | 04:12 PM
  #4  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: LIEN SALE/HIS LOSS YOUR GAIN crx lots of extras - we make deals on this (portenio78)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by portenio78 &raquo;</TD></TR><TR><TD CLASS="quote">Seen this ride at Rage...who ever jumps on this is coming up for sure!!! BUMP.</TD></TR></TABLE>

your stuff should be ready to go ----
Old Sep 11, 2005 | 04:33 PM
  #5  
All Motor Ek99's Avatar
Junior Member
 
Joined: Feb 2005
Posts: 440
Likes: 0
From: Socal, ca, USA
Default

sell me the tranny
Old Sep 11, 2005 | 04:38 PM
  #6  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (dmxarnold)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dmxarnold &raquo;</TD></TR><TR><TD CLASS="quote">sell me the tranny</TD></TR></TABLE>

sorry we wont part out until the shell is sold first -
Old Sep 18, 2005 | 03:39 PM
  #7  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Jason@Rage)

Old Sep 26, 2005 | 09:19 PM
  #8  
Vinceg99's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 5,130
Likes: 1
From: Greenfield, WI, USA
Default Re: (Jason@Rage)

how much for the shell by chance? long haul for me but yeah...lol
Old Sep 26, 2005 | 09:30 PM
  #9  
91_civicsi's Avatar
Junior Member
 
Joined: Feb 2003
Posts: 357
Likes: 0
From: Winnipeg, Manitoba, Canada
Default

bump for a wild looking car. Arent you the guys that made the blue h22 turbo eg with 725 horse? if so i remember seeing that car in HCI i think it was a couple years back. What a sick car that was. And if that is you mad respect for the shop you got going on down there.
Old Sep 26, 2005 | 09:34 PM
  #10  
Chunty Butt Kevin's Avatar
B*a*n*n*e*d
 
Joined: Nov 2003
Posts: 94
Likes: 0
From: Paying Hookers with Checks in Los Angeles
Default

so he wanted all this work done to his car, but couldnt pay it off?
Old Sep 27, 2005 | 08:56 AM
  #11  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Vinceg99)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vinceg99 &raquo;</TD></TR><TR><TD CLASS="quote">how much for the shell by chance? long haul for me but yeah...lol</TD></TR></TABLE>

would like to get around 4 - but if you are really interested we could work something to help with the shipping. once we sale the shell then we can start to part it out - <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91_civicsi &raquo;</TD></TR><TR><TD CLASS="quote">bump for a wild looking car. Arent you the guys that made the blue h22 turbo eg with 725 horse? if so i remember seeing that car in HCI i think it was a couple years back. What a sick car that was. And if that is you mad respect for the shop you got going on down there.</TD></TR></TABLE>

ya we did that blue/purplr eg on HCI - we still have it its for sale too.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chunty Butt Kevin &raquo;</TD></TR><TR><TD CLASS="quote">so he wanted all this work done to his car, but couldnt pay it off?</TD></TR></TABLE>

ya dropped 1500 off and a huge list. then we started getting high on the bill said he would be down after a week or so. next put money on a friends credit card that got returned. so bad deal all around.

Old Sep 27, 2005 | 09:02 AM
  #12  
Vinceg99's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 5,130
Likes: 1
From: Greenfield, WI, USA
Default Re: (Jason@Rage)

$400 for the shell?
Old Sep 27, 2005 | 09:19 AM
  #13  
DUFFM4N's Avatar
Honda-Tech Member
 
Joined: Jun 2005
Posts: 14,536
Likes: 0
From: DUFF GARDENS, CA, USA A OK
Default Re: (Vinceg99)

Old Sep 27, 2005 | 10:12 AM
  #14  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Vinceg99)

has been at the shop for over 18 months, didnt want to but had to lien sale it. The balance was huge but need room to work and cant keep moving it in and out everyday.
Year - 1991 si
Vin - JHMED9369MS009853
Milage - 149655.4 ( cant be sure on this, just took this off the cluster )
Plates - no plates but we will supply when we sale the car to YOU 12.00 at the DMV
ASKING - 10,000 with new b16 bottom end
8,500 with stock bottom end
4,000 rolling shell
The Lien sale was completed last week and we have all the paper work in house and ready for you to look at if you would like.
Car info - ( has )

350z blue paint ( 2 small scratches one on wing and one on door )
Wings west kit w/wing ( front bumper not mounted very good )
JDM front conversion ( headlights need to be wired )
Stock interior and only 1 factory seat, has most of the plastics and carpet and door panels ( black )
Old Sep 27, 2005 | 08:19 PM
  #15  
Vinceg99's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 5,130
Likes: 1
From: Greenfield, WI, USA
Default Re: (Jason@Rage)

Im sorry but 4 grand for that shell is just rediculous....
The interior isnt even complete...
Old Sep 27, 2005 | 08:31 PM
  #16  
92LSVTEC's Avatar
Honda-Tech Member
 
Joined: Nov 2004
Posts: 5,264
Likes: 0
From: IRAQ SUCKS
Default Re: (Vinceg99)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vinceg99 &raquo;</TD></TR><TR><TD CLASS="quote">Im sorry but 4 grand for that shell is just rediculous....
The interior isnt even complete...</TD></TR></TABLE>

x2
Old Sep 27, 2005 | 08:34 PM
  #17  
Got-JDM's Avatar
 
Joined: Apr 2005
Posts: 92
Likes: 0
From: WI, LES Etats Unis
Default Re: (Vinceg99)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vinceg99 &raquo;</TD></TR><TR><TD CLASS="quote">Im sorry but 4 grand for that shell is just rediculous....
The interior isnt even complete...</TD></TR></TABLE>
x3
Old Sep 28, 2005 | 09:11 AM
  #18  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Got-JDM)

post post post -

4000.00 is the asking price -

Complete 350z paint
Wings West body kit
JMD front end
Mugen copy rear wing
JDM cluster
DFI PRE WIRED FOR B motor
- 1 seat ( buy it and i will get another )
Fuel pump

4000 is the asking price people with money can offer the price they think its worth =

easy

Old Sep 28, 2005 | 09:34 AM
  #19  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Vinceg99)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vinceg99 &raquo;</TD></TR><TR><TD CLASS="quote">Im sorry but 4 grand for that shell is just rediculous....
The interior isnt even complete...</TD></TR></TABLE>

Dont be sorry - "rediculous" is ok - Here's my thoughts,

Someone that has money and is looking for something like this can offer what they think is fair to both parties. I have alot of crap on the car that can stay or go in and during the buy/sale process. This could help both sides to get the car sold and delivered in the form they both like -

things like - the custome crossmember, all the guages with steel braid lines, b series mounts, dfi and harness, wheels, wheels studs and new hubs,

other part - things that can be left on or taken off, intercooler and piping for a b swap, wheels, msd digital 6, etc.

We just want this thing to leave and if it take lowering the price we will BUT we do have to try and get SOME of the money we lost.

Thank you
Old Oct 7, 2005 | 07:01 AM
  #20  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Jason@Rage)

Old Oct 14, 2005 | 11:44 AM
  #21  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Jason@Rage)

whats a clean 91 si sheel painted with body kit worth - alittle help
Old Oct 14, 2005 | 11:42 PM
  #22  
Vinceg99's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 5,130
Likes: 1
From: Greenfield, WI, USA
Default Re: (Jason@Rage)

$500 bucks....I just picked up a clean 89 with a b18a for 475 bucks...
Old Oct 15, 2005 | 03:03 PM
  #23  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Vinceg99)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vinceg99 &raquo;</TD></TR><TR><TD CLASS="quote">$500 bucks....I just picked up a clean 89 with a b18a for 475 bucks...</TD></TR></TABLE>

ya well i guess ill hold off then. i could pc. out the car and get more then 500 -
Old Oct 15, 2005 | 04:31 PM
  #24  
Vinceg99's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 5,130
Likes: 1
From: Greenfield, WI, USA
Default Re: (Jason@Rage)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jason@Rage &raquo;</TD></TR><TR><TD CLASS="quote">

ya well i guess ill hold off then. i could pc. out the car and get more then 500 - </TD></TR></TABLE>
Where exactly? By selling the incomplete interior? By selling doors that no one will buy? Buy selling a body kit?? Sorry to be rude and up front but man it isnt made of gold you cant get big bucks for them...And trust me on TRYING to part out cars I have parted out about 5 CRX's and Ithink I was able to get rid of 1 set of doors and 1 hatch for the body that is...
Old Oct 15, 2005 | 04:50 PM
  #25  
Whitfield Inc.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jan 2004
Posts: 3,836
Likes: 0
From: Montclair, ca, san bernardino
Default Re: (Vinceg99)

[QUOTE=Vinceg99]
Where exactly? By selling the incomplete interior? By selling doors that no one will buy? Buy selling a body kit?? Sorry to be rude and up front but man it isnt made of gold you cant get big bucks for them...And trust me on TRYING to part out cars I have parted out about 5 CRX's and Ithink I was able to get rid of 1 set of doors and 1 hatch for the body that is...

Well - I guess you are allowed an opinion...I will have to wait till I find someone that wants a blue ef with the kit and jdm stuff. Thanks for posting



All times are GMT -8. The time now is 08:23 AM.