1995 civic h/b dx 160,xxx miles on chasis is my best guess.
The title is CLEAN.

-Engine
*The engine is a jdm b16a1 & was ordered from passwordjdm in June, and was installed in the car in late June. The swap was ordered with new axles and the non-lsd hydro tranny.
*At the time of install the timing belt and water pump were replaced, along with wheel bearings and ball joints.
*The clutch and flywheel where replaced with a new 6 puck clutch & lighter flywheel. (knock off brand).
*It has a knock-off short ram intake.
-Suspension
*KYB AGX shocks/struts about 2500 miles on them.
*H&R springs.
-Wheels
16" silver Rota Circuit 8's w/ Falken tires 50% tread left.
-Interior
*Black dash and panels in excellent condition.
*jdm audio console.
*Driver seat has small tear.
*Still have the hatch cover.
-I started the project in hopes of upgrading the valvetrain and throwing some cams in the biatch. HOWEVER I have a baby on the way so I need something more practical...so here is what needs finished.

*Needs new brakes soon.
*Still has the DX exhuast.
*Needs carpet.
*I have the a/c equipment minus the bracket.

keep in mind the car now has rotas and does not sit as low is in the pics do to new suspension.

http://gallery.502streetscene....=1320


Price is 5,100 obo w/ wheels or 4,700 w/o wheels

 

bump it bishes...

looking to trade for 4 door tegs, accords & civics. I can trade and throw in a little cash, or trade down and take some cash.

This swap is only 2 months old and I've only put about 1500 miles on it.

 

are there any other trades you would considered

 

I'll consider anything. Try to keep in mind that I have a kiddo on the way so the more practical, the better for me.

Thanks h-t.

 

2 rx7s (fb and a FC) and a starion all three for yours. They are my projects. Starion is almost done needs paint and a couple other little kinks worked out. The FB was gonna be my DD needs exhaust and door panels. FC needs a motor and I have around $4000 in just the shell of it.

not a lowball i have about $8000 in all three cars, and i just need a driveable car to travel in

 

Thanks, but no thanks. I'm sure I could learn a lot from a rotary project, but I too need a driveable vehicle.

Thanks anyways.

 

FB and starion are DD i was offering all three

 

ttt

 

No offers? c'mon guys...

ttt

 

You have PM my friend

 

pm sent.

 

to the tip-top

 

mid-morning bump.

 

back up...

I can email pics to anyone that wants them.

 

bump.

car needs a tranny mount.

 

bump $4,500 w/o the rotas. Skunk2 catback should be on the car in the next week or so.

mainly looking to sell the car now. Got my eye on an explorer.

 

Car now has white cx wheels w/ okay tread left. Car also has new front rotors and pads, new dizzy. The skunk2 catback is on the car car, with a bolted on 2.5" test pipe so that it can easily be removed.

Still needs carpet and a rear wiper motor. The swap has less than 45k miles originally on it. Runs smooth, idels smooth. Will make a great car for someone.

$4,300

 

up

 

Want to trade check sig

 

want to trade for a DA

 

Thanks guys, but I'm in the market for a baby-mobile.

Maybe a camry, explorer, etc...

I can throw in some cash a trade possibly.