I just bought a JVC KD-G310 headunit and i was wonder if i this:

do i just cut them and plug into the white part of the wiring harness? (picture below)

 

i dont think so, the bottom plug looks like an adapter. what car is this going in?

 

1994 integra (generation 3)

 

yeah, then im pretty sure that the bottom cable is just an adapter cable, you wont need the other

 

so just cut the white plug off and combine the black plug wires to the GREY adapter wires together? if i do, can i use anything besides the "Male" and/or "Female" two open end plugs thingy and i don't want to solder them..

 

just go to Circuit city, and tell them u want the Met JV1680 harness, and all u got to do is plug it in the plug and u are done no wires to cut or anything

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STEV3-O &raquo;</TD></TR><TR><TD CLASS="quote">just go to Circuit city, and tell them u want the Met JV1680 harness, and all u got to do is plug it in the plug and u are done no wires to cut or anything</TD></TR></TABLE>

or you can save yourself $20 bucks by just cutting the white piece on the left and connecting the same color wires together with wire connectors.

let me guess, you bought the deck at best buy and bought the harness from circuit city to save yourself some money?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by *****StEr &raquo;</TD></TR><TR><TD CLASS="quote">or you can save yourself $20 bucks by just cutting the white piece on the left and connecting the same color wires together with wire connectors.

let me guess, you bought the deck at best buy and bought the harness from circuit city to save yourself some money?</TD></TR></TABLE>

yup i just cut and matched the wires together..it was my first car stereo installation..i learned alot from my dad.