If anyone knows, or has the instructions on reprogramming a new/replacement Viper pager remote it would be much appreciated! Thanks!

 

What is the model # of the alarm? 94

 

viper 790xv

 

If memory serves me right, you open a door, turn the ignition on, and press the lock button on the new transmitter...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C_EJ8 &raquo;</TD></TR><TR><TD CLASS="quote">If memory serves me right, you open a door, turn the ignition on, and press the lock button on the new transmitter... </TD></TR></TABLE>

nothing to do with the valet button??

this seems too easy for someone to hijack your alarm system just by buying a replacement remote.

 

Not that I can remember... But instructions on programming are right on the package....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C_EJ8 &raquo;</TD></TR><TR><TD CLASS="quote">Not that I can remember... But instructions on programming are right on the package.... </TD></TR></TABLE>

right, i realize this but i just bought a whole new alarm so i dont have those instructions. before i go head and just plug in the new brain and use that, i want to at least know if my old remote was at fault and not the old brain.

 

open door, turn ignition on, hit the valet button once, then hold down the valet button, you should hear a chirp from your siren then hit the lock button on your remote.

 

thanks! in the original installation manual it says something about the pink wire needs to be connected to the ignition in order to use the "learn routine" function...is this true for reprogramming a new remote/pager?

 

Yes 94

 

lets SEE!
Get in your car lock your doors manually.

stick your key in your ignition an pull it in and out 10 times within 12 seconds make sure to do it properly, and making sure the key comes out of the cylinder completely

If you have done it properly they lights will flash

After they have flashed you hit any button on the remote

And then Wala its programmed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jdm94gsr &raquo;</TD></TR><TR><TD CLASS="quote">lets SEE!
Get in your car lock your doors manually.

stick your key in your ignition an pull it in and out 10 times within 12 seconds make sure to do it properly, and making sure the key comes out of the cylinder completely

If you have done it properly they lights will flash

After they have flashed you hit any button on the remote

And then Wala its programmed
</TD></TR></TABLE>Yea just what he needs to do. 94

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vicn77 &raquo;</TD></TR><TR><TD CLASS="quote">open door, turn ignition on, hit the valet button once, then hold down the valet button, you should hear a chirp from your siren then hit the lock button on your remote.</TD></TR></TABLE>

Your directions work perfectly. Thankyou!!! I have the 474T remote and it was wearing out... I bought two new ones but couldn't find directions anywhere.

Bump for a post that saved me a ton of headache!!

 

whould this work on a 791xv remote?

 

Yes it will, if you want "Standard Configuration". 94