I'm about to go and help a friend do his head gasket today in a -few mins. but I don't have the order that you remove the head bolts in or the torgue specifications. And we can't find a haynes in our area. I searched for it and can't find anything could someone please help me out? THanks.

 

You can remove it in any order, just do it in some sort of criss-cross pattern.

Lemme find the post for the torquing down order and I'll edit my post.

EDIT:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shamoo &raquo;</TD></TR><TR><TD CLASS="quote">For stock head bolts....
(8.7 kgf.m, 63 ft-lbs) Apply motor oil to all threads first and top of washer.

Tighten them in this sequence. Imagine looking at motor from front of car. And reading bolts from left to right starting from intake side:
8, 4, 2, 6, 10 &lt;---intake order
7, 3, 1, 5, 9 &lt;---exhaust order

Hope that helped dude.

Torque them to 22ft-lbs first in that order. Then to 63ft-lbs in that order.

Good luck.

</TD></TR></TABLE>

 

holy **** thanks alot for a fast *** response.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Strikerrr &raquo;</TD></TR><TR><TD CLASS="quote">holy **** thanks alot for a fast *** response.
</TD></TR></TABLE>

No problem. Let me know if you have any other specific questions. I have a Helms manual here.