<U>PLEASE READ BEFORE ASKING ANY QUESTIONS</U> I am located in Dallas, Texas...shipping is extra on everything...I will NOT ship outside of the USA...all parts are in working condition...I DONT KNOW THE EXACT MILEAGE THESE PARTS HAVE ON THEM, its not like they had a guage on them...most of the parts are in good condition and some are pretty used which should be obvious by looking at the pics I provided...<U>I accept paypal, money order & credit card</U>...there are a few items which dont have any pics but I will try to have them up when I have a chance to...I can accept REASONABLE offers, if you lowball me I will NOT reply...thanks for your time

hydro GSR tranny with new type-r LSD $700

MSD SCI-L box with coil and coil wire and distributor with no coil inside $150
http://www.imagestation.com/my...00013
http://www.imagestation.com/my...00014

turbo xs dual stg boost controller $140
http://www.imagestation.com/my...00028

GSR fat fives in excellent condition with brand new BFG drag radials (215-50-15) and almost new tires for the rears...UPDATE will come with an extra GSR fat five wheel with tire mounted. $460
http://www.imagestation.com/pi...e.jpg
http://www.imagestation.com/pi...5.jpg
http://www.imagestation.com/pi...3.jpg


black leather si seats and rear leather seats $360
http://www.imagestation.com/my...00002
http://www.imagestation.com/my...00001

barely used precision 880 injectors $260
http://www.imagestation.com/my...00018

GSR skunk2 manifold with extra vacum ports $160
http://www.imagestation.com/pi...b.jpg

complete GSR head with no intake mani or distributor $500

k20 DC sports header $240

civic si ECU (k20 ecu) $120

ACT street disk ACT pressure plate (not extreme) $150
http://www.imagestation.com/my...00012

Walbro low pressure for 92-95 eg(255) $60
http://www.imagestation.com/pi...1.jpg

set of full coilovers for 92-00 civic or 94-00 integra (just like the omni coilovers but another unknown brand) $440 (only fronts pictured)
http://www.imagestation.com/my...00029

GSR blades with 225/55/15 drag radials and two regular tires mounted...lots of thread left on all tires. $600
http://www.imagestation.com/pi...0.jpg
http://www.imagestation.com/pi...a.jpg
http://www.imagestation.com/pi...a.jpg
http://www.imagestation.com/pi...c.jpg
http://www.imagestation.com/pi...3.jpg
[/B]

Endyn catch can setup (some of the other parts not in the pics) $100
http://www.imagestation.com/my...00016

dc sports lower rear tie bar from 2003 civic SI $80
http://www.imagestation.com/my...00025

hondata s200 with boost and p28 ECU$420
http://www.imagestation.com/my...00009

2 apexi boost guages (one with black face and the other with a white face)
the white one doesnt come with any wiring.
WHITE FACE$40
BLACK FACE $55
http://www.imagestation.com/my...00031
http://www.imagestation.com/pi...5.jpg

MSD b16 ignition wires $30http://www.imagestation.com/pi...3.jpg

GSR girdle (what you see is what you get) $50
http://www.imagestation.com/pi...c.jpg

b-series in eg turbo kit...barely used t3/t4 garret turbo, brand new K&N turbo air filter, rev hard tubular manifold, 3 inch downpipe, precision meduim IC, complete 2.5in IC piping, tial WG and dumptube, tial BOV, GSR oil pan tapped with -10 for oil return, oil return lines, turbo feed line, t-bolt clamps, couplers. $2000http://www.imagestation.com/pi...1.jpg
http://www.imagestation.com/pi...8.jpg
http://www.imagestation.com/pi...3.jpg
http://www.imagestation.com/pi...d.jpg
http://www.imagestation.com/pi...8.jpg

brand new 2.5inch flex pipe $25
http://www.imagestation.com/pi...c.jpg

never used nuformz block guard $50
http://www.imagestation.com/pi...3.jpg

92-95 civic HID setup...came off of a acura TL...one of the boxes slighty damaged but everything still works SOLD
http://www.imagestation.com/pi...e.jpg

93 civic dx BLACK dashboard $100
http://www.imagestation.com/pi...2.jpg

93 civic dx hatchback interior panels...most of them are black some are gray. (IM for individual prices or to buy the whole lot)
http://www.imagestation.com/pi...0.jpg
http://www.imagestation.com/pi...e.jpg
http://www.imagestation.com/pi...5.jpg




Modified by tommyten@fast-turbo.com at 1:54 PM 8/26/2005

 

you have p.m!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by papito_85 &raquo;</TD></TR><TR><TD CLASS="quote">you have p.m!!</TD></TR></TABLE>

yeah, what he said!

 

replied to PMs

 

bump for lower prices