is the cold air a two piece or just one piece?

 

My old one was.

 

i c, anyone know for sure?

 

I had one maybe 5 years ago it was 2pc but it was small like 2" pipe, i would go with a $9.99 ebay special cai with a new k&n filter

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crx Jimmy &raquo;</TD></TR><TR><TD CLASS="quote"> i would go with a $9.99 ebay special cai with a new k&n filter</TD></TR></TABLE>

bingo.

 

live in california when they pull me over which they will even though i wont be doing anything.

i need a carb sticker.

 

i got one last winter and it's one peice. i think they changed them

 

mine i bought a few years ago was two piece. but i remember seeing 1 piece versions before then. im surprised to hear that they went back to a 1 piece design.

quite frankly, you basically are just paying for that carb sticker. when i opened up the box after i received it, i couldnt believe i spent $200 on 2 pieces of tin, a rubber hose, a cheap filter, and 2 stickers...

 

maybe the b series intakes are two piece and the d series are 1 piece.

 

mine was for a D series, it came in 2 pieces.

 

I bought mine about 6 months ago and it was a one piece unit. It was for a stock engine 89 SI.

I'm running a B18c and had to get a "stepped" coupler where it hooks up to the throttle body (the outside diameter of the throttle body is larger on the B18c than what would be on a stock engine).

Technically, it's not legal, but does have the factory applied BAR sticker and when I smog checked the car, the shop didn't bat an eye at it. (the car has been BAR certified)

Everybody should know that the AEM intakes for hybrid cars do not have BAR certification!!

Wes

 

its V1 vs V2 intakes.

the AEM V1 Intake is 2 pieces (short ram tube with another piece to add to make it cold air. So you could rock it short ram if you want. kinda a 2-in-1 intake)

V2 is all one piece.

Both of my intakes were for stock D16.

 

My aem i bought a few years ago was a one piece.

 

guess it depends on how old the intake is, im guessing msot of them is one piece now

 

my AEM for my D16 was 1 piece...but I made it 2 so I could add a bypass valve...

 

what do u use to cut it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ba4 &raquo;</TD></TR><TR><TD CLASS="quote">what do u use to cut it?</TD></TR></TABLE>
super modified laser pointer

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Suck my DX &raquo;</TD></TR><TR><TD CLASS="quote">
super modified laser pointer</TD></TR></TABLE>

 

i had a two piece one, it was the old style.



but then the newer version became one piece, as shown here on a guy from a meet i went to's engine.

 

yeah that older style has that aem decal on it and the newer one has that big ugly oval aem sticker.

 

what size bypass valve do i buy for the new cai style?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ba4 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

Is that the kid from mtv made?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by illcrxsi1 &raquo;</TD></TR><TR><TD CLASS="quote">yeah that older style has that aem decal on it and the newer one has that big ugly oval aem sticker.</TD></TR></TABLE>

I guess i have the newer one then, cause it has the round plaque on it

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ba4 &raquo;</TD></TR><TR><TD CLASS="quote">what size bypass valve do i buy for the new cai style?</TD></TR></TABLE>

As far as i knew, all 88-91 aem intakes were 2.25"