GSXR 1000 ITB's for sale and side exit header
Thread Starter
Honda-Tech Member
Joined: Apr 2004
Posts: 919
Likes: 0
From: San Jose, CA, US of A
****GSXR 1000 ITB's, side exit header, And Ls/type R block for sale*****
I have a set of Home made Itb's for sale. I will include the fuel rail, map sensor and stock b16 injectors. I am asking $600.00 OBO for these
Made by Inline Perfromance out of Houston,tx
I have a side exit (pass. side) header with 02 bung for a b-series that has been used for one season. It is in good shape. I am asking $400.00 for it
I have also decided to sell my bottom block. It is a LS block with type R internals from the crank up. I have 3 races and 3 dyno runs on it and 300 miles on top of that. I change the oil after every race and i only run Royal purple synthetic oil in it. I will throw in the timing belt, oil pump, water pump, crank pully..... Basically it will be ready for a head. The block is painted red. The motor with my head made 210 HP and 138.8 TQ. This is a good strong reliable setup. I am asking $1000.00 OBO for it
Modified by Karterguy13 at 2:23 PM 8/17/2005
Modified by Karterguy13 at 2:24 PM 8/17/2005
Modified by Karterguy13 at 9:22 PM 8/19/2005
Made by Inline Perfromance out of Houston,tx
I have a side exit (pass. side) header with 02 bung for a b-series that has been used for one season. It is in good shape. I am asking $400.00 for it
I have also decided to sell my bottom block. It is a LS block with type R internals from the crank up. I have 3 races and 3 dyno runs on it and 300 miles on top of that. I change the oil after every race and i only run Royal purple synthetic oil in it. I will throw in the timing belt, oil pump, water pump, crank pully..... Basically it will be ready for a head. The block is painted red. The motor with my head made 210 HP and 138.8 TQ. This is a good strong reliable setup. I am asking $1000.00 OBO for it
Modified by Karterguy13 at 2:23 PM 8/17/2005
Modified by Karterguy13 at 2:24 PM 8/17/2005
Modified by Karterguy13 at 9:22 PM 8/19/2005
Thread Starter
Honda-Tech Member
Joined: Apr 2004
Posts: 919
Likes: 0
From: San Jose, CA, US of A
Re: GSXR 1000 ITB's for sale and side exit header (stevenlo)
I'm looking for A half sized radiator, EG or CRX shell, 1.8 or 2.0L block, Skinnies, traction bar, Racingseat, 5 point harness, CF hood for my EF, JG intake manifold, Large throttle body, RC 440 injectors, OBD1 vtec dist., Wide band o2, Header that exits under car,................
Trending Topics
Honda-Tech Member
Joined: Aug 2005
Posts: 1,956
Likes: 0
From: Fort Myers, FL, USA
Re: GSXR 1000 ITB's for sale and side exit header (Karterguy13)
Just curious if you still have the side exit header for sale and the itbs I guess. I have a b18c5 and wondering if those will fit it. I noticed you would trade for a few things and I have a crx shell in practically perfect shape but a shell is all it is, no wires, fuel/brake lines, wiring, nothing. Stripped it all down to start over again. I also have a cf hood. Let me know if interested. I've got a new project so I really need to get rid of these things. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
