best headgasket for d16?
Thread Starter
Honda-Tech Member
Joined: Mar 2004
Posts: 1,103
Likes: 0
From: champaign, il, usa
Re: best headgasket for d16? (Tad)
well are their any other types? my head was milled a little bit and my block was decked, i would want an aftermarket gasket that i can compensate for the deck and milling so i dont raise my compression.
Trending Topics
Honda-Tech Member
Joined: Jun 2002
Posts: 11,440
Likes: 2
From: Richmond, Va, usa
Re: (civicsi940)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicsi940 »</TD></TR><TR><TD CLASS="quote">i like cometic headgaskets</TD></TR></TABLE>
i've heard of nothing, but people having trouble with these. Stick with oem. They are cheap too!
i've heard of nothing, but people having trouble with these. Stick with oem. They are cheap too!
Honda-Tech Member
Joined: Apr 2003
Posts: 3,094
Likes: 0
Re: (SOHC_MShue)
Not a D series ninja, but I thought OEM gaskets were garbage when it came to D series?
I know I run a oem B series one on b16...
I really dont know, I would assume OEM is always best though.
I know I run a oem B series one on b16...
I really dont know, I would assume OEM is always best though.
Honda-Tech Member
Joined: May 2002
Posts: 3,448
Likes: 0
From: Illanoise, USA
Re: (SOHC_MShue)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">
i've heard of nothing, but people having trouble with these. Stick with oem. They are cheap too!</TD></TR></TABLE>
Give me a few days and I'll let you know what I think of them..
i've heard of nothing, but people having trouble with these. Stick with oem. They are cheap too!</TD></TR></TABLE>
Give me a few days and I'll let you know what I think of them..
Honda-Tech Member
Joined: Apr 2003
Posts: 1,364
Likes: 0
From: Ottawa, ON
Re: (ladysman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ladysman »</TD></TR><TR><TD CLASS="quote">
Give me a few days and I'll let you know what I think of them.. </TD></TR></TABLE>
The beast might be alive...?
Give me a few days and I'll let you know what I think of them..
</TD></TR></TABLE>The beast might be alive...?
Honda-Tech Member
Joined: May 2002
Posts: 3,448
Likes: 0
From: Illanoise, USA
Re: (ELSpool)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ELSpool »</TD></TR><TR><TD CLASS="quote">
The beast might be alive...? </TD></TR></TABLE>
The beast might be alive...?
</TD></TR></TABLE>
Honda-Tech Member
Joined: May 2005
Posts: 444
Likes: 0
Re: (hondaboy4life)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaboy4life »</TD></TR><TR><TD CLASS="quote">isnt the y8 head gasket supposed to be good cuz its metal....</TD></TR></TABLE>
I believe so.
I believe so.
Honda-Tech Member
Joined: Jun 2002
Posts: 11,440
Likes: 2
From: Richmond, Va, usa
Re: (ladysman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ladysman »</TD></TR><TR><TD CLASS="quote">Give me a few days and I'll let you know what I think of them.. </TD></TR></TABLE>
she alive again?!
</TD></TR></TABLE>she alive again?!
Honda-Tech Member
Joined: May 2002
Posts: 3,448
Likes: 0
From: Illanoise, USA
Re: (SOHC_MShue)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">
she alive again?! </TD></TR></TABLE>
Give me a little time...
she alive again?!
</TD></TR></TABLE>Give me a little time...
Honda-Tech Member
Joined: Jun 2002
Posts: 7,942
Likes: 0
From: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Re: (SOHC_MShue)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">
she alive again?! </TD></TR></TABLE>
That's what I'm sayin!!!!!
she alive again?!
</TD></TR></TABLE>That's what I'm sayin!!!!!
Honda-Tech Member
Joined: May 2002
Posts: 3,448
Likes: 0
From: Illanoise, USA
Re: (boostincoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostincoupe »</TD></TR><TR><TD CLASS="quote">
That's what I'm sayin!!!!!</TD></TR></TABLE>
lol, quit stealing this guys thread.
Be patient!
That's what I'm sayin!!!!!
</TD></TR></TABLE>lol, quit stealing this guys thread.
Be patient!
Honda-Tech Member
Joined: Mar 2004
Posts: 1,729
Likes: 0
From: DFW
Re: (xtremeazian)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xtremeazian »</TD></TR><TR><TD CLASS="quote">i say go with the oem d16y8 gasket.</TD></TR></TABLE>
Honda-Tech Member
Joined: Nov 2004
Posts: 2,296
Likes: 0
From: cincinnati, oh, united states
Re: (LilCivic04)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LilCivic04 »</TD></TR><TR><TD CLASS="quote">well i have my pistons are 20 oversized, should i still use oem because i know its not made for my overbored pistons? </TD></TR></TABLE>
<--same question
<--same question