someone recenlty said how they have heard about people dropping valve using skunk2 stage 2 cams and valve spring. just wondering if anyone has heard anything. i'm going to be reving mine to at least 9500 rpm. please let me know what you guys think.

 

Skunk2 = Supertech

 

That equation doesn't apply to S2 springs.

 

I have a case now with an engine that dropped a valve and we were using the first gen S2 springs w/S2 cams stage 2, can you send me more information about other cases I need to make a complaint to Skunk2 because we're pretty sure everything was properly installed.

 

The first gen Skunk springs would be about 9 years old and Eibach I think.

 

thanks for the comments, please anyone that reads this and has an opinon about it write it down. i'd like some more info and stories before i install them.

 

Did the springs break?

 

no they didn't break, i have been hearing negative things though about them and i didn't want to put them into a built motor and rev it 9700 then drop a valve. just wanting some feedback from other people.

 

https://honda-tech.com/zerothread?id=1146425

There's a few threads about them breaking on here. I don't have that much time to look them up.

I switched mine out for the Rocket Gen2 springs just to be safe.

 

I would stay away from Skunks older non-Eibach springs. There new stuff is good though if my guess is correct.

 

are these the new skunk2 springs?

http://www.modacar.com/product...DAVAS/