89 CRX Si w/JDM B16a1 SiR in Pittsburgh Pa.
Thread Starter
Honda-Tech Member
iTrader: (6)
Joined: Apr 2004
Posts: 4,309
Likes: 0
From: Pittsburgh, PA
89 CRX Si w/JDM B16a1 SiR in Pittsburgh Pa.
'89 CRX Si
Barbados Yellow (y-49)
JDM B16a1 SiR I
Y1 Tran. PR3 Ecu
35k est. eng/tran mi.
139k chassis mi.
- DC 4-1 header
- Solo short shift w/ Prothane bushings
- Solo shift ****
All New brakes: Rotors, pads, drums, and shoes.
New windshield w/ warranty!
New distributor, fuel filter, cap, rotor and NGK's
homemade 2.5" exhaust w/ high flow cat (not installed)
The car is gutted, there is no hvac, no radio, no carpet. no muffler, no rear bumper support, no rear wiper. The black hood has scratches and holes for hood pins. I have the yellow hood but it has dents.
It has common rust spots for a Honda (see pics)
The suspension is stock.
The car may come with 15" TSW and Kumho Ecsta 711's or Si wheels with bad tires, shown in the 7th pic below, depending on the sale price.
The car runs great, pulls hard, idle is smooth, and eng. is quiet.
Mobil1 Synthetic has been used since swap. (Approx. 1yr. ago)
Head gasket was replaced at the time of swap. (Preventative maintaince)
Tranny is silky smooth, No grinds or pop-out.
This car is a blast to drive. With an 8000 rpm redline it packs a VTEC kick to the nuts. Top end must be handled with restraint.
I'm asking $2800. obo!
I am located in Pittsburgh, Pennsylvania.
Please IM me with any questions you may have!
Modified by rexman at 10:05 PM 8/16/2005
Barbados Yellow (y-49)
JDM B16a1 SiR I
Y1 Tran. PR3 Ecu
35k est. eng/tran mi.
139k chassis mi.
- DC 4-1 header
- Solo short shift w/ Prothane bushings
- Solo shift ****
All New brakes: Rotors, pads, drums, and shoes.
New windshield w/ warranty!
New distributor, fuel filter, cap, rotor and NGK's
homemade 2.5" exhaust w/ high flow cat (not installed)
The car is gutted, there is no hvac, no radio, no carpet. no muffler, no rear bumper support, no rear wiper. The black hood has scratches and holes for hood pins. I have the yellow hood but it has dents.
It has common rust spots for a Honda (see pics)
The suspension is stock.
The car may come with 15" TSW and Kumho Ecsta 711's or Si wheels with bad tires, shown in the 7th pic below, depending on the sale price.
The car runs great, pulls hard, idle is smooth, and eng. is quiet.
Mobil1 Synthetic has been used since swap. (Approx. 1yr. ago)
Head gasket was replaced at the time of swap. (Preventative maintaince)
Tranny is silky smooth, No grinds or pop-out.
This car is a blast to drive. With an 8000 rpm redline it packs a VTEC kick to the nuts. Top end must be handled with restraint.
I'm asking $2800. obo!
I am located in Pittsburgh, Pennsylvania.
Please IM me with any questions you may have!
Modified by rexman at 10:05 PM 8/16/2005
Trending Topics
11:11
Joined: Nov 2003
Posts: 3,962
Likes: 10
From: Hopewell, PA, USA
Re: 89 CRX Si w/JDM B16a1 SiR in Pittsburgh Pa. (rexman)
I've been looking for a replacement for my civic, and this just might be it. Are you firm on $3K? Looking for any trades at all?
I'm in the general Pittsburgh area as well, maybe I can come take a look at it this weekend. Give me a call 724-462-8197
Jason
I'm in the general Pittsburgh area as well, maybe I can come take a look at it this weekend. Give me a call 724-462-8197
Jason
Thread Starter
Honda-Tech Member
iTrader: (6)
Joined: Apr 2004
Posts: 4,309
Likes: 0
From: Pittsburgh, PA
Re: (93CX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93CX »</TD></TR><TR><TD CLASS="quote">damn, i want that.</TD></TR></TABLE>
Make me an offer.
I'd be willing to deliver for a fee.
IM me if you have serious interest.
Thank you for the bump.
Make me an offer.
I'd be willing to deliver for a fee.
IM me if you have serious interest.
Thank you for the bump.
Thread Starter
Honda-Tech Member
iTrader: (6)
Joined: Apr 2004
Posts: 4,309
Likes: 0
From: Pittsburgh, PA
Re: (94sisol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94sisol »</TD></TR><TR><TD CLASS="quote">Trade for 94 dx coupe?</TD></TR></TABLE>
Why?
UP!
Why?
UP!