Laminar/Raceheads all motor CRX 12.15@116 mph
Gary and his 90 crx run 12.15@116 mph with an all motor GSR buildup.231 hp and 156 tq to the wheels did it thanx to Carlo of Raceheads and Mike of Auto Laminar.
Carlo reworked the gsr motor with stage 3 port and polish job on the head and intake manifold,and the installation of custom cp pistons.Mike tuned the motor with Hondata,and the results speak for themselves.
The stock gsr crank is still in place,and jun 3 cams were installed and dialed in.
The crx weighs in at 2150 lbs with driver.
A
for the canadian all motor scene,with an impressive mph.
As soon as the suspention is dialed in,we might see some mid 11 second passes.
I will post dyno sheet and time slips by tomorrow.
thanx
Carlo reworked the gsr motor with stage 3 port and polish job on the head and intake manifold,and the installation of custom cp pistons.Mike tuned the motor with Hondata,and the results speak for themselves.
The stock gsr crank is still in place,and jun 3 cams were installed and dialed in.
The crx weighs in at 2150 lbs with driver.
A
for the canadian all motor scene,with an impressive mph.As soon as the suspention is dialed in,we might see some mid 11 second passes.
I will post dyno sheet and time slips by tomorrow.
thanx
Thread
Thread Starter
Forum
Replies
Last Post




