cam choice (searched please help!)
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 646
Likes: 0
From: va beach, va, usa
cam choice (searched please help!)
before i ask, i have searched and didnt find what i needed.
ok im building my gsr motor right now and im having a hard time deciding what cams to go with. here is my setup
JG valve train
JG cam gears
skunk2 intake manifold
hondata intake gasket
stock gsr TB
CAI
Wiesco 11.5:1 compression pistons
ARP rod bolts
stock gsr rods
stock headgasket
ITR oil pump
new timing belt. all new gaskets
precision 310cc injectors
hondata s100
dc 4-1 header
omni test pipe
2.5 exhaust
act 8lb flywheel exedy clutch
i have been looking at blox tuner type B camshafts but im really not sure what camshafts will make good power and not be too big for my setup
so can you guys help me pick a nice set of cams what will make good power with my compression and motor setup
thanks!
ok im building my gsr motor right now and im having a hard time deciding what cams to go with. here is my setup
JG valve train
JG cam gears
skunk2 intake manifold
hondata intake gasket
stock gsr TB
CAI
Wiesco 11.5:1 compression pistons
ARP rod bolts
stock gsr rods
stock headgasket
ITR oil pump
new timing belt. all new gaskets
precision 310cc injectors
hondata s100
dc 4-1 header
omni test pipe
2.5 exhaust
act 8lb flywheel exedy clutch
i have been looking at blox tuner type B camshafts but im really not sure what camshafts will make good power and not be too big for my setup
so can you guys help me pick a nice set of cams what will make good power with my compression and motor setup
thanks!
Re: cam choice (dc2kid)
RM M22's would RIP in that motor if you are willing to rev past the stock rev limiter! 
Contatct Aquafina, rochesterricer, hybridvteceg, rtzcom, VtecKiDD..all of these guys can take care of you!
Contatct Aquafina, rochesterricer, hybridvteceg, rtzcom, VtecKiDD..all of these guys can take care of you!
Joined: Oct 2003
Posts: 5,899
Likes: 0
From: atlanta, ga, usa
Re: cam choice (clean rice)
M22s are a great camshaft, i have several car with them locally, and i ran them in my old motor. I am using M24xs in my new motor
If your looking for a more "commercialized" camshaft i would look at Skunk2 PRO1s or BUDDY CLUB 4s
If your looking for a more "commercialized" camshaft i would look at Skunk2 PRO1s or BUDDY CLUB 4s
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 646
Likes: 0
From: va beach, va, usa
Re: (OBD 1)
yeah ive been hearing some bad things about those M22's. iono i think im gonna go with CTR's or some skunk stage 1's. im gonna go talk to my tuner/builder tomorrow and see what he thinks..
Honda-Tech Member
Joined: May 2002
Posts: 913
Likes: 0
From: Oklahoma City,, Oklahoma, Da 73170
Re: (dc2kid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dc2kid »</TD></TR><TR><TD CLASS="quote">yeah ive been hearing some bad things about those M22's. iono i think im gonna go with CTR's or some skunk stage 1's. im gonna go talk to my tuner/builder tomorrow and see what he thinks.. </TD></TR></TABLE>
Let me just say this, dont believe eveything you read on here. Some of these so called "problems" may be made up stories to get back at people they don't like.
Read ALL the facts and make your own decision on what you want to get, don't write off some brand cause of hearsay.
Let me just say this, dont believe eveything you read on here. Some of these so called "problems" may be made up stories to get back at people they don't like.
Read ALL the facts and make your own decision on what you want to get, don't write off some brand cause of hearsay.
Thread
Thread Starter
Forum
Replies
Last Post
DANG YO
All Motor / Naturally Aspirated
12
Dec 2, 2005 06:06 PM