D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff!
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff!
^^^^^^^Please do not think this stupid ad is affiliated with me ^^^^^^^
I know. "This guy hasn't sold on here before... We shouldn't even trust him..."
I have a lot of stuff for sale. If you are seriously interested in anything I have for sale, please e-mail me. If, however, you are asking a question that other people might benefit from as well, ask away in a reply.
All prices do not include shipping. Will ship from 93555. You pay ACTUAL shipping plus 1.00 handling.
Here we go...
First up, we have d-series ITB's made by myself. They are 38mm. They were installed and ran for a period of 2 months without any leaks (vacuum, fuel) on my own 90 crx. They come with a home-made throttle cable bracket(for use with your current throttle cable), extended fuel line(to reach the fuel filter), extended tps harness(so you don't have to cut your own harness), all vacuum lines necessary, a stock map sensor from a cbr 600 f4i(which worked for me), stock tps, and everything else you see here.
They ran well, with a very stable idle @ 1100 rpm. Of course, in order to receive the full potential of these, you should(read: must) be tuned. They run rather rich, and sound mean as hell. They are being sold because I am starting a hmt project.
Price: 280 plus ship SOLD to eegeesixtsu
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
Next, we have the zeitronix wideband controller. This item includes the basic kit(all wires, o2 sensor, instructions, and datalogging software, PLUS an exhaust gas temperature probe, PLUS a serial-to-usb converter w/ driver software. The EGT probe is brand new, and the o2 sensor was used when I was trying to learn turboedit. It was used only while tuning and is almost immaculate. This sensor was not used with the ITB’s, for fear of fouling the sensor. Bought it direct from Zeitronix. Selling because I have no need for it anymore.
Can get pics if you are one who needs proof and can’t trust just anyone
Price: 300 plus ship
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
Next, we have some 4 point harnesses made by Weapon-R. I bought these ~2 years ago in anticipation of going autocrossing. Needless to say, I didn’t use them or even go to the track/event . I installed these for 2 weeks prior to said event, and took them out promptly because I couldn’t reach the passenger window crank while belted up. I have no AC. They really hold you down well!
Price: 80 plus ship (for both driver and passenger harnesses!)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Here, we have a “vintage” JG engine dynamics B-series cam gear. I Bought this off Ebay ~1.5 years ago. I was told that it was for a single-cam motor, but the seller lied. It has been sitting for the whole time I’ve had it. None of the bolts are stripped, it has never been installed! It has scratches, but these do not affect the function of this gear. Selling because everyone who has a b-series in town is a broke-***(because of the motor swap, no doubt…)
Price: 45 plus ship for only one cam gear
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxx
This is a treat! ARP rod bolts that fit ANY civic, integra motor! They are new/ unused/ sealed in package. I am selling them because I am starting a hmt project, and now want forged rods.
Price: SOLD to mleach
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxx
ALTERNATORS! I have 5 that are fully functional, tested on a very thorough machine at Autozone. Not to just see if they charge, but to test solenoid and regulators on the alternators. 4 of these are denso alternators and 1 is a Mitsubishi alternator, made for the Hondas with the Mitsubishi alternators (kind of confusing, I know). The 4 denso’s are slightly different sizes, and some have different part numbers, but the attendant at Autozone used the same connectors on all 4 denso’s. The Mitsubishi alternator used a different connector. This is all I really know. I can get numbers off of each one later if requested.
Price: 50 plus ship each
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
Fully functional TPS for those of you who have broken ones! No cracks!
Price: SOLD to Chris m
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
UPDATE: I sold one of these. There is enough here to complete another fuel rail, though! 10 plus ship is for 2 fuel rails.
D16A6 fuel rails! 2 of them. 1 includes crush washers, both include big nut on the end. Let me know it you need injectors as well!
Price: 10 plus ship (for both!)
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx
This is a Golden Eagle Vacuum manifold. It looks used, but not abused. It would really clean up well! It includes everything in picture: one vacuum inlet, 2 outlets and 1 plug, and 1 end-plug. I originally bought this to use with the ITB’s, but I found a better way.
Price: sold to jappwr
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
Here’s a 15/16” brake master cylinder. Very useful for those with upgraded brake calipers, or those who have added disc brakes on the rear. Pumps more fluid for the same brake travel. I’m not sure the condition of this, but I’ve heard rebuild kits for these are relatively inexpensive. I have no need for it, but I know there are serious racers who would love one of these!
Price: 40 plus ship!
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
This one’s different… It has a plug similar to obd1 o2 sensors, however, it it a narrowband (1-wire). Not sure what it goes to, but there’s sure to be someone who needs it!
Price: 10 plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxx
A friend of mine recently did a decent build-up of a eclipse GS-X, and had this left over. I snatched it up, along with a few other pieces, and will not be able to use this. It was running, without leaks, when pulled from his car. I guarantee this to hold pressure up to 15 psi, although at that pressure, you should be looking elsewhere… Anyway, the fins are in very good condition and it’s very thick. Supports up to 280 hp? Nice item, wish I could use it.
Price: 45 plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxx
Here we have 1 planet audio subwoofer and 1 pioneer amp. These were installed in my crx for 5 months until I started getting more into speed. Also my CD’s were stolen and I had no music to play, so I took these out for fear that these might be stolen as well. I strongly dislike crooks. Anyway, both of these are in pretty much new shape, the sub went through the break-in period and I finally started playing these loud near the end. I think this is why my CD’s were taken… I’ve always been careful with not playing these “too” loud, because the rest of the speakers in the car couldn’t take the heat. I have the original boxes for both items and they will be shipped in them, inside a bigger box, if bought as a package deal. No medium density fiberboard box is included, so you can save on shipping and purchase locally!
Amp specs: 250x2/760x1 MAX POWER; has low pass filter(80Hz, -12db/oct); bridgeable to 2 ohms
lowered pricing!
Prices: (Sub=80, Amp=180, Package=240) plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
Here’s a Kenwood equalizer, that fits perfectly in the clock cutout in the 88-91 civics/crx’s. Works very well, and boosts power to the 4 regular car speakers, and makes adjusting bass(sub) level easy from the drivers seat. Very cool little item, but as with all my other stereo stuff, it sadly must find a new home. But you could use it for sure!
Price: 60 plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
I also have a socketted PM6 with the dual cam euro-zc program, as well as a vision programmed chip. Vision has no limiter? Never tested past 8200, but runs hard. Taking offers, but might not sell… SOLD
Also a modified 88-91 civic obd-0 SI dizzy. A friend of mine did some fancy dremmel work to make it work on my d15bvtec. Works with 2 bolts and doesn’t leak! Cap and rotor were replaced when the swap was done(1 year ago). Great condition! Also taking offers, but might not sell.
I have more items I am willing to part with that will be up soon and I hope you enjoyed shopping at Josh’s!
Modified by AMkrew_1 at 2:16 PM 7/26/2005
Modified by AMkrew_1 at 11:35 PM 7/27/2005
Modified by AMkrew_1 at 2:12 PM 7/28/2005
Modified by AMkrew_1 at 8:29 PM 7/29/2005
Modified by AMkrew_1 at 6:51 PM 7/31/2005
Modified by AMkrew_1 at 11:53 PM 8/4/2005
Modified by AMkrew_1 at 12:41 AM 8/6/2005
I know. "This guy hasn't sold on here before... We shouldn't even trust him..."
I have a lot of stuff for sale. If you are seriously interested in anything I have for sale, please e-mail me. If, however, you are asking a question that other people might benefit from as well, ask away in a reply.
All prices do not include shipping. Will ship from 93555. You pay ACTUAL shipping plus 1.00 handling.
Here we go...
First up, we have d-series ITB's made by myself. They are 38mm. They were installed and ran for a period of 2 months without any leaks (vacuum, fuel) on my own 90 crx. They come with a home-made throttle cable bracket(for use with your current throttle cable), extended fuel line(to reach the fuel filter), extended tps harness(so you don't have to cut your own harness), all vacuum lines necessary, a stock map sensor from a cbr 600 f4i(which worked for me), stock tps, and everything else you see here.
They ran well, with a very stable idle @ 1100 rpm. Of course, in order to receive the full potential of these, you should(read: must) be tuned. They run rather rich, and sound mean as hell. They are being sold because I am starting a hmt project.
Price: 280 plus ship SOLD to eegeesixtsu
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
Next, we have the zeitronix wideband controller. This item includes the basic kit(all wires, o2 sensor, instructions, and datalogging software, PLUS an exhaust gas temperature probe, PLUS a serial-to-usb converter w/ driver software. The EGT probe is brand new, and the o2 sensor was used when I was trying to learn turboedit. It was used only while tuning and is almost immaculate. This sensor was not used with the ITB’s, for fear of fouling the sensor. Bought it direct from Zeitronix. Selling because I have no need for it anymore.
Can get pics if you are one who needs proof and can’t trust just anyone
Price: 300 plus ship
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
Next, we have some 4 point harnesses made by Weapon-R. I bought these ~2 years ago in anticipation of going autocrossing. Needless to say, I didn’t use them or even go to the track/event . I installed these for 2 weeks prior to said event, and took them out promptly because I couldn’t reach the passenger window crank while belted up. I have no AC. They really hold you down well!
Price: 80 plus ship (for both driver and passenger harnesses!)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Here, we have a “vintage” JG engine dynamics B-series cam gear. I Bought this off Ebay ~1.5 years ago. I was told that it was for a single-cam motor, but the seller lied. It has been sitting for the whole time I’ve had it. None of the bolts are stripped, it has never been installed! It has scratches, but these do not affect the function of this gear. Selling because everyone who has a b-series in town is a broke-***(because of the motor swap, no doubt…)
Price: 45 plus ship for only one cam gear
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxx
This is a treat! ARP rod bolts that fit ANY civic, integra motor! They are new/ unused/ sealed in package. I am selling them because I am starting a hmt project, and now want forged rods.
Price: SOLD to mleach
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxx
ALTERNATORS! I have 5 that are fully functional, tested on a very thorough machine at Autozone. Not to just see if they charge, but to test solenoid and regulators on the alternators. 4 of these are denso alternators and 1 is a Mitsubishi alternator, made for the Hondas with the Mitsubishi alternators (kind of confusing, I know). The 4 denso’s are slightly different sizes, and some have different part numbers, but the attendant at Autozone used the same connectors on all 4 denso’s. The Mitsubishi alternator used a different connector. This is all I really know. I can get numbers off of each one later if requested.
Price: 50 plus ship each
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
Fully functional TPS for those of you who have broken ones! No cracks!
Price: SOLD to Chris m
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
UPDATE: I sold one of these. There is enough here to complete another fuel rail, though! 10 plus ship is for 2 fuel rails.
D16A6 fuel rails! 2 of them. 1 includes crush washers, both include big nut on the end. Let me know it you need injectors as well!
Price: 10 plus ship (for both!)
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx
This is a Golden Eagle Vacuum manifold. It looks used, but not abused. It would really clean up well! It includes everything in picture: one vacuum inlet, 2 outlets and 1 plug, and 1 end-plug. I originally bought this to use with the ITB’s, but I found a better way.
Price: sold to jappwr
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
Here’s a 15/16” brake master cylinder. Very useful for those with upgraded brake calipers, or those who have added disc brakes on the rear. Pumps more fluid for the same brake travel. I’m not sure the condition of this, but I’ve heard rebuild kits for these are relatively inexpensive. I have no need for it, but I know there are serious racers who would love one of these!
Price: 40 plus ship!
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
This one’s different… It has a plug similar to obd1 o2 sensors, however, it it a narrowband (1-wire). Not sure what it goes to, but there’s sure to be someone who needs it!
Price: 10 plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxx
A friend of mine recently did a decent build-up of a eclipse GS-X, and had this left over. I snatched it up, along with a few other pieces, and will not be able to use this. It was running, without leaks, when pulled from his car. I guarantee this to hold pressure up to 15 psi, although at that pressure, you should be looking elsewhere… Anyway, the fins are in very good condition and it’s very thick. Supports up to 280 hp? Nice item, wish I could use it.
Price: 45 plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxx
Here we have 1 planet audio subwoofer and 1 pioneer amp. These were installed in my crx for 5 months until I started getting more into speed. Also my CD’s were stolen and I had no music to play, so I took these out for fear that these might be stolen as well. I strongly dislike crooks. Anyway, both of these are in pretty much new shape, the sub went through the break-in period and I finally started playing these loud near the end. I think this is why my CD’s were taken… I’ve always been careful with not playing these “too” loud, because the rest of the speakers in the car couldn’t take the heat. I have the original boxes for both items and they will be shipped in them, inside a bigger box, if bought as a package deal. No medium density fiberboard box is included, so you can save on shipping and purchase locally!
Amp specs: 250x2/760x1 MAX POWER; has low pass filter(80Hz, -12db/oct); bridgeable to 2 ohms
lowered pricing!
Prices: (Sub=80, Amp=180, Package=240) plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
Here’s a Kenwood equalizer, that fits perfectly in the clock cutout in the 88-91 civics/crx’s. Works very well, and boosts power to the 4 regular car speakers, and makes adjusting bass(sub) level easy from the drivers seat. Very cool little item, but as with all my other stereo stuff, it sadly must find a new home. But you could use it for sure!
Price: 60 plus ship
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx
I also have a socketted PM6 with the dual cam euro-zc program, as well as a vision programmed chip. Vision has no limiter? Never tested past 8200, but runs hard. Taking offers, but might not sell… SOLD
Also a modified 88-91 civic obd-0 SI dizzy. A friend of mine did some fancy dremmel work to make it work on my d15bvtec. Works with 2 bolts and doesn’t leak! Cap and rotor were replaced when the swap was done(1 year ago). Great condition! Also taking offers, but might not sell.
I have more items I am willing to part with that will be up soon and I hope you enjoyed shopping at Josh’s!
Modified by AMkrew_1 at 2:16 PM 7/26/2005
Modified by AMkrew_1 at 11:35 PM 7/27/2005
Modified by AMkrew_1 at 2:12 PM 7/28/2005
Modified by AMkrew_1 at 8:29 PM 7/29/2005
Modified by AMkrew_1 at 6:51 PM 7/31/2005
Modified by AMkrew_1 at 11:53 PM 8/4/2005
Modified by AMkrew_1 at 12:41 AM 8/6/2005
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
suppose you'll need an E-mail address, huh?
AMkrew_1@yahoo.com
In about a week or so, I will be getting 4 manual boost controllers. They will be sold for ~26 shipped, no tax, no handling. Still must decide on pricing. Same as the ones on http://www.dawesdevices.com Let me know if you are interested!
Also, if you are wondering, I do have a paypal account!
AMkrew_1@yahoo.com
In about a week or so, I will be getting 4 manual boost controllers. They will be sold for ~26 shipped, no tax, no handling. Still must decide on pricing. Same as the ones on http://www.dawesdevices.com Let me know if you are interested!
Also, if you are wondering, I do have a paypal account!
Trending Topics
* B A N N E D *
Joined: Nov 2003
Posts: 1,798
Likes: 0
From: chico, Ca, US
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
ill take a fuel rail,tps and maybe we can work somethin out on that wideband. email me at polarbeartuning@yahoo.com
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Christopher M »</TD></TR><TR><TD CLASS="quote">bump for the high desert solid guy here</TD></TR></TABLE>
Thanks! How goes business, Chris? Sold that stuff I sold to you yet?
Thanks!
How goes business, Chris? Sold that stuff I sold to you yet?
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Christopher M »</TD></TR><TR><TD CLASS="quote">bump for the high desert solid guy here</TD></TR></TABLE>
Thanks! How goes business, Chris? Sold that stuff I sold to you yet?
Thanks!
How goes business, Chris? Sold that stuff I sold to you yet?
* B A N N E D *
Joined: Nov 2003
Posts: 1,798
Likes: 0
From: chico, Ca, US
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
business is going good go to polarbeartuning.com still a work in process. Those parts were gone that day
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sockvtec »</TD></TR><TR><TD CLASS="quote">what is that master cylinder of off, interested</TD></TR></TABLE>
sorry, I didn't get back to you earlier. I;m not sure, but I was told a newer GSR w/ rear discs? I know the bolt holes line up to my crx, if that helps! Anyway, it's still up for grabs!
the fuel rail and tps are pending, as well as the GE manifold!
sorry, I didn't get back to you earlier. I;m not sure, but I was told a newer GSR w/ rear discs? I know the bolt holes line up to my crx, if that helps! Anyway, it's still up for grabs!
the fuel rail and tps are pending, as well as the GE manifold!
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AMkrew_1 »</TD></TR><TR><TD CLASS="quote">flibberdyjibbet!
for sale! </TD></TR></TABLE>
for sale!
</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
I know someone wants/needs this wideband. I bought it straight from Zeitronix for over 400 because it included the serial to usb converter and the exhaust temp sender. I think this is a great deal for the buyer. It was used once!
-josh-
-josh-
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Christopher M »</TD></TR><TR><TD CLASS="quote">Thanks for the parts Josh honest guy here</TD></TR></TABLE>
you are very welcome!
you are very welcome!
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jappwr »</TD></TR><TR><TD CLASS="quote">"Golden Eagle Vacuum manifold"
Sold to Me
I'll let you know when I get it.
</TD></TR></TABLE>
yes indeed! Gonna build some "vouches" in no time!
Sold to Me
I'll let you know when I get it.
</TD></TR></TABLE>
yes indeed! Gonna build some "vouches" in no time!
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eegeesixtsu »</TD></TR><TR><TD CLASS="quote">check your email..i want the itb's</TD></TR></TABLE>
Emailed back!
Emailed back!
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 157
Likes: 0
From: ridgecrest, ca
Re: D-series ITB's, Zeitronix WB, 4pt harnesses, ARP, 5 Alternators, Sub & Amp, Other Stuff! (AMkrew
throttlebodies almost sold... Wideband still for sale. Top post updated with most recent changes! Paypal me and items ship next day (except for weekends!) Thanks!
-josh-
-josh-