ALANIZ GSR HEAD. has never been used since i got it back from alaniz
Thread Starter
Joined: Nov 2003
Posts: 566
Likes: 0
From: Rockport, tx, us
ALANIZ GSR HEAD. has never been used since i got it back from alaniz
competition Alaniz headwork.
3 angle valve job changed retainers ,springs, and got oversized valves.
port and polished.
Complete visual inspection of complete head. Check all surfaces for straightness. Complete disassembly. Inspect all valvetrain parts for wear. Remove all studs and lap all surfaces. Degrease and clean head of oils. Baseline flow bench test. Full Competition port and polish head.Polish, deshroud and debur all chambers. Competition valve job. Resurface and hand lap head to customer specs, or up to .030 material removal. Final flow test with data sheet. Reassemble complete head. Final CC check. Includes valve seals.
the head work alone was 1400
1500 obo.
3 angle valve job changed retainers ,springs, and got oversized valves.
port and polished.
Complete visual inspection of complete head. Check all surfaces for straightness. Complete disassembly. Inspect all valvetrain parts for wear. Remove all studs and lap all surfaces. Degrease and clean head of oils. Baseline flow bench test. Full Competition port and polish head.Polish, deshroud and debur all chambers. Competition valve job. Resurface and hand lap head to customer specs, or up to .030 material removal. Final flow test with data sheet. Reassemble complete head. Final CC check. Includes valve seals.
the head work alone was 1400
1500 obo.
Thread
Thread Starter
Forum
Replies
Last Post
CRX MASE
All Motor / Naturally Aspirated
9
Jul 6, 2006 06:57 PM