Race bottom end Sleeved block B18A1 Crower rods Knife edged blueprinted crank gsr
Thread Starter
Joined: Oct 2004
Posts: 308
Likes: 0
From: ct, usa
Benson Sleeved Block B18A1 Crower rods Knife edged blueprinted crank gsr
here for sale is a my full drag racing setup that was going to be used in our shop drag car
plans have changed for this yr and the car wont be done till next yr and it makes no sense to keep everything till next yr
no money was over looked with this setup
The Block::
B18A1 Benson sleeved block 81.5mm bore freshly honed ready for pistons
the block is ready to go
Rods::
CROWER 4340 Steel Billet Connecting Rods
B93729B-4 - BILLET CROWERODS ACURA INTEGRA 1.8 GSR VTEC
- $711.78
When it comes to connecting rods...Crower is the Sport Compact industry leader. Other's have attempted to cash in on Crower's success by offering a cheaper rod made in China, but the fact remains, if you're running a forced induction, nitrous, high rpm or all of the above Honda/Acura engine...you need Crower's Premium Steel Billet connecting rods. Features include premium USA manufactured steel alloy, proven I-beam design intended for high horsepower applications, 220,000 psi Crower rod bolts that are stronger than ARP, tolerances to .0001", and system matched sets to .5 grams total weight.
Crank::
GSR Crank
everything possible done
Knife edged crank
Lightened
Balanced
Blueprinted with the Crower rods and CP pistons for the blueprinting and balancing
Micropolished
Oil passages opened up and honed
NO MONEY WAS OVER LOOKED ON THIS SETUP
Modified by dk-fabrications at 2:12 PM 7/20/2005
Modified by dk-fabrications at 8:54 AM 7/21/2005
Modified by dk-fabrications at 9:58 AM 7/21/2005
plans have changed for this yr and the car wont be done till next yr and it makes no sense to keep everything till next yr
no money was over looked with this setup
The Block::
B18A1 Benson sleeved block 81.5mm bore freshly honed ready for pistons
the block is ready to go
Rods::
CROWER 4340 Steel Billet Connecting Rods
B93729B-4 - BILLET CROWERODS ACURA INTEGRA 1.8 GSR VTEC
- $711.78
When it comes to connecting rods...Crower is the Sport Compact industry leader. Other's have attempted to cash in on Crower's success by offering a cheaper rod made in China, but the fact remains, if you're running a forced induction, nitrous, high rpm or all of the above Honda/Acura engine...you need Crower's Premium Steel Billet connecting rods. Features include premium USA manufactured steel alloy, proven I-beam design intended for high horsepower applications, 220,000 psi Crower rod bolts that are stronger than ARP, tolerances to .0001", and system matched sets to .5 grams total weight.
Crank::
GSR Crank
everything possible done
Knife edged crank
Lightened
Balanced
Blueprinted with the Crower rods and CP pistons for the blueprinting and balancing
Micropolished
Oil passages opened up and honed
NO MONEY WAS OVER LOOKED ON THIS SETUP
Modified by dk-fabrications at 2:12 PM 7/20/2005
Modified by dk-fabrications at 8:54 AM 7/21/2005
Modified by dk-fabrications at 9:58 AM 7/21/2005
