CHeck out my ordering page

http://www.j-k-tuning.com

Ecus are setup for uberdata, crome, hondata, neptune, and all over software used.
They are waranteed against DOA. And come with support.

Prices are for P28 ecus or P06 converted ecus, look at my vouches for feedback! Ask for other ecu options.

$150 including ZIF socket and chip for hondata or uberdata, 4-pin header installed.

$140 with ZIF no chip.

$135 socketed, no ZIF and no chip.

Also ask about the serial and superdroids datalogging cable, that is available unpon special request.

When you order one (place in note of money order or note in paypal!
1) Name
2)Specs (for basemap)
3)Exactly what you want done (header,data logging cable, etc, be specific)

https://honda-tech.com/zerothread?id=1133374 That is my other thread, you can look here for more details.

Here is a pic with a datalogging cable installed.



^ Picture of a ZIF socket and super droids datalogging cable.

Don't be scared to IM me or email me, john@j-k-tuning.com. AIM uncgolf25.

 

Check out my new website.

 

A little unclear, but does that include an ECU too? Or does a person need to send you their ecu?

 

That includes the ecu. THere are seperate prices if you want to send me the ecu. I will try to clear this up. Thanks for the input.

 

ordered a p28 with chip for hondata and 4pin header today. LEt me know when it goes out if you could please. Payment was made with paypal

 

Thanks, I recieved your payment. I will keep you updated on the progress.

 

TTT. Thanks for the interest.

 

 

What would be done to a p28 ecu to run crome, i assume you juct socket it and place a chip in there, right?

 

pmd.

 

ECUs are going out as fast as I can get them out.