I dropped my block, rods, crank, and pistons off today and had the guy at the machine shop look at it. When they measured the journal size on my crank none of it it matches up the the h22a4's specs, They are the same as the B20A, They are an aftermarket crank-rod-piston setup, but the only thing i know is its a JE piston, and maybe a carillo rod, But the guy said it didnt look like a stock honda crank-. The block has been line bored, and all of the rod bearings that came out just say standard and arnt colors like the honda dealership sez they should be. ACL makes my rod bearings and they all have readable numbers, but the mains just have numbers and a symbol that looks like a rounded T with an H inside of it-They all have numbers to- But my crank may need to be turned to 10/10 and its gotta be bored- But i dont wanna turn it until i can find out if i can get undersized bearings, Ive been told i can but i dont know were to look, Any help would be great- Anybody know were i can cross reference these numbers and see what they are for???